Browsing by Subject "TRIGA"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Characterization of neutron flux spectra for radiation effects studies(2011-05) Graham, Joseph Turner; Landsberger, SheldonThe effects of neutron displacement damage on materials are sensitive to neutron energy spectra. In controlled neutron damage experiments, a well characterized neutron flux spectrum is critical in determining the equivalent dose for displacement damage. Two techniques were used to characterize the neutron flux spectra in the University of Texas at Austin TRIGA research nuclear reactor. The first technique uses a standard method of measuring the reaction rates of two identical metal foils, one of which was irradiated in a Cd cover, the other of which was irradiated bare. Assuming an analytic form of the neutron spectrum the reaction rates were used to determine an approximate spectrum. The second technique uses the reaction rates measured from a set of activated metal foils along with two spectral unfolding techniques to approximate and then refine the neutron spectrum. A Matlab code was developed which fits radiative capture reaction rates to an approximate spectrum using a least squares approach. The result was used as an initial guess in a second Matlab code which refines the epithermal and fast energy ranges of the spectrum using reaction rates from threshold reactions. Errors in the reaction rates calculated from the resulting spectrum to the measured reaction rates were used to assess the accuracy of the final neutron spectrum.Item Determination of fission product yields of 235U using gamma ray spectroscopy(2012-12) Lu, Christopher Hing; Biegalski, Steven R.; Landsberger, SheldonIt is important to have a method of experimentally calculating fission product yields. Statistical calculations and simulations produce very large uncertainties. Experimental calculations, depending on the methods used, tend to produce lower uncertainties. This work set up a method to calculate fission product yields using gamma ray spectroscopy. In order to produce a method that was theoretically sound, a simulation was set up using OrigenArp to calculate theoretical concentrations of fission products from the irradiation of natural uranium. From these concentrations, the fission product yields were calculated to verify that they would agree with expected values. Moving forward in the work, the total flux at the point of irradiation, in the pneumatic transfer system, was calculated and determined to be 3.9070E+11 ± 6.9570E+10 n/cm^2/s at 100 kW. Once the flux was calculated, the method for calculating fission product yields was implemented and yields were calculated for 10 fission products. The yields calculated were in very good agreement (within 10.04%) with expected values taken from the ENDF-349 library. This method has strong potential in nuclear forensics as it can provide a means for developing a library of experimentally-determined fission product yields, as well as rapid post-nuclear detonation analysis.