Experimental study of microemulsion characterization and optimization in enhanced oil recovery : a design approach for reservoirs with high salinity and hardness

Simple item page
dc.contributor.advisorNguyen, Quoc P.
dc.contributor.advisorPope, G.A.
dc.creatorFlaaten, Adam Knut
dc.date.accessioned2017-02-03T19:51:36Z
dc.date.accessioned2018-01-22T22:31:35Z
dc.date.available2017-02-03T19:51:36Z
dc.date.available2018-01-22T22:31:35Z
dc.date.issued2007-12
dc.description.abstractThe objective of this research was to develop a systematic laboratory approach, and design a high performance chemical flood for a problematic reservoir with formation brine having high salinity and hardness. Aqueous and microemulsion phase behavior tests have previously been shown to be a rapid, inexpensive and highly effective means to select the best chemicals and minimize the need for relatively expensive core flood tests. Phase behavior tests were therefore done with various combinations of surfactants, co-solvents and alkali for several crude oils and reservoir conditions, including the problematic reservoir of interest for design. Extensive phase behavior testing identified performance trends of chemicals at different concentrations, which could be interpolated for optimization. The trends were ultimately used to develop an approach to design potential chemical flood formulations for the problematic reservoir of interest. Using this approach, several formulations were designed showing good performance in phase behavior testing. One of the formulations was then validated in a core flood experiment to give nearly 100% oil recovery with very low surfactant adsorption. The chemical flood design used a salinity gradient that was robust enough with withstand the sharp salinity contrast of the formation brine and surfactant slug at the displacement front. Salinity analysis of core flood effluent showed how Type III microemulsion conditions were targeted to most effectively mobilize residual oil.en_US
dc.description.departmentPetroleum and Geosystems Engineeringen_US
dc.format.mediumelectronicen_US
dc.identifierdoi:10.15781/T2FX74340
dc.identifier.urihttp://hdl.handle.net/2152/45548
dc.language.isoengen_US
dc.relation.ispartofUT Electronic Theses and Dissertationsen_US
dc.rightsCopyright © is held by the author. Presentation of this material on the Libraries' web site by University Libraries, The University of Texas at Austin was made possible under a limited license grant from the author who has retained all copyrights in the works.en_US
dc.rights.restrictionRestricteden_US
dc.subjectChemical flooden_US
dc.subjectOil reservoirsen_US
dc.subjectOil recoveryen_US
dc.titleExperimental study of microemulsion characterization and optimization in enhanced oil recovery : a design approach for reservoirs with high salinity and hardnessen_US
dc.typeThesisen_US
dc.type.genreThesisen_US

Files

Collections

University of Texas at Austin