Manganese oxide cathodes for rechargeable batteries

Simple item page
dc.contributor.advisorManthiram, Arumugamen
dc.creatorIm, Dongminen
dc.date.accessioned2008-08-28T21:30:43Zen
dc.date.accessioned2017-05-11T22:15:50Z
dc.date.available2008-08-28T21:30:43Zen
dc.date.available2017-05-11T22:15:50Z
dc.date.issued2002en
dc.descriptiontexten
dc.description.abstractManganese oxides are considered as promising cathodes for rechargeable batteries due to their low cost and low toxicity as well as the abundant natural resources. In this dissertation, manganese oxides have been investigated as cathodes for both rechargeable lithium and alkaline batteries. Nanostructured lithium manganese oxides designed for rechargeable lithium cells have been synthesized by reducing lithium permanganate with methanol or hydrogen in various solvents followed by firing at moderate temperatures. The samples have been characterized by wet-chemical analyses, thermal methods, spectroscopic methods, and electron microscopy. It has been found that chemical residues in the oxides such as carboxylates and hydroxyl groups, which could be controlled by varying the reaction medium, reducing agents, and additives, make a significant influence on the electrochemical properties. The Li/Mn ratio in the material has also been found to be a critical factor in determining the rechargeability of the cathodes. The optimized samples exhibit a high capacity of close to 300 mAh/g with good cyclability and charge efficiency. The high capacity with a lower discharge voltage may make these nanostructured oxides particularly attractive for lithium polymer batteries. The research on the manganese oxide cathodes for alkaline batteries is focused on an analysis of the reaction products generated during the charge/discharge processes or by some designed chemical reactions mimicking the electrochemical processes. The factors influencing the formation of Mn3O4 in the two-electron redox process of d-MnO2 have been studied with linear sweep voltammetry combined with X-ray diffraction. The presence of bismuth, the discharge rate, and the microstructure of the electrodes are found to affect the formation of Mn3O4, which is known to be electrochemically inactive. A faster voltage sweep and a more intimate mixing of the manganese oxide and carbon in the cathode are found to suppress the formation of Mn3O4. Bismuth has also been found to be beneficial in the one-electron process of gMnO2 when incorporated into the cathode. The results of a series of chemical reactions reveal that bismuth is blocking some reaction paths leading to the unwanted birnessite or Mn3O4. Barium is also found to play a similar role, but it is less effective than bismuth for the same amount of additive. Optimization of the additives has the potential to make the rechargeable alkaline cells based on manganese oxides to successfully compete with other rechargeable systems due to their low cost, environmental friendliness, and excellent safety features.
dc.description.departmentMaterials Science and Engineeringen
dc.format.mediumelectronicen
dc.identifierb56832552en
dc.identifier.oclc56123286en
dc.identifier.proqst3110622en
dc.identifier.urihttp://hdl.handle.net/2152/665en
dc.language.isoengen
dc.rightsCopyright is held by the author. Presentation of this material on the Libraries' web site by University Libraries, The University of Texas at Austin was made possible under a limited license grant from the author who has retained all copyrights in the works.en
dc.subject.lcshManganese oxides--Synthesisen
dc.subject.lcshCathodesen
dc.subject.lcshStorage batteriesen
dc.titleManganese oxide cathodes for rechargeable batteriesen
dc.type.genreThesisen

Files

Collections

University of Texas at Austin