The design and validation of an impinging jet test facility.

dc.contributor.advisorVan Treuren, Kenneth W.
dc.contributor.authorRobertson, Peter R.
dc.contributor.departmentMechanical Engineering.en
dc.contributor.otherBaylor University. Dept. of Mechanical Engineering.
dc.date.accessioned2006-05-28T01:13:46Z
dc.date.accessioned2017-04-07T19:32:33Z
dc.date.available2006-05-28T01:13:46Z
dc.date.available2017-04-07T19:32:33Z
dc.date.copyright2005
dc.date.issued2006-05-28T01:13:46Z
dc.descriptionIncludes bibliographical references (p. 124-128).en
dc.description.abstractAn experimental jet impingement facility was constructed with the capability of conducting a detailed analysis of the local heat transfer coefficients beneath an array of large impinging jets. The facility was validated with initial heat transfer studies that determined an appropriate jet discharge coefficient of 0.802 and created a correlation relating local jet Reynolds number and stagnation point heat transfer. The correlation matched closely with previous studies. The thermal effects of impinging jets were visualized by liquid crystal thermography. The resulting thermal footprints of downstream jets revealed the first known documented case of the heat transfer effects of horseshoe vortices on the target surface. This phenomenon was identified and discussed.en
dc.description.degreeM.S.en
dc.description.statementofresponsibilityby Peter R. Robertson.en
dc.format.extentxv, 128 p. : ill.en
dc.format.extent10002831 bytes
dc.format.mimetypeapplication/pdf
dc.identifier.urihttp://hdl.handle.net/2104/3008
dc.language.isoen_USen
dc.rightsBaylor University theses are protected by copyright. They may be viewed from this source for any purpose, but reproduction or distribution in any format is prohibited without written permission. Contact librarywebmaster@baylor.edu for inquiries about permission.en
dc.rights.accessrightsWorldwide accessen
dc.subjectGas-turbines -- Dynamics.en
dc.subjectGas-turbines -- Blades.en
dc.subjectThermodynamics.en
dc.subjectReynolds number.en
dc.subjectAir jets.en
dc.titleThe design and validation of an impinging jet test facility.en
dc.typeThesisen

Files