Design and application of microstrip leaky wave antennas for radar sensing

This dissertation investigates the application of the frequency-scanned beam of a microstrip leaky wave antenna (LWA) to track humans in the two-dimensional (2-D) range-azimuth plane. The history, operating principles and frequency-scanned properties of a microstrip LWA are first reviewed. The basic concept of using a microstrip LWA to track humans is verified by designing, building and testing a broadband microstrip LWA, developing the necessary processing algorithm, and collecting data using a vector network analyzer. A number of topics are then investigated to further advance the concept. First, the idea of combining the frequency-scanned antenna with a short-pulse ultra-wideband (UWB) radar is developed to realize a portable, real-time system for human tracking. The radar concept and the components of the system are discussed in detail. Line-of-sight and through-wall measurements of a human subject are carried out to demonstrate the performance. Second, a new LWA structure is proposed to achieve a narrower azimuth beam, which requires both a small leaky-wave attenuation constant and a long aperture. The transverse resonance method (TRM) is applied to analyze the proposed structure and the results are verified with measurements of a built prototype. Third, a new signal processing technique, compressive sensing, is applied to further improve the resolution in both the azimuth and down range dimensions. The technique is tested with simulation and measurement data and is shown to produce sharper target responses in both the down range and azimuth dimensions. Lastly, the radar cross-section (RCS) of a microstrip LWA is studied. The antenna mode scattering and structural mode scattering are modeled separately. A ray picture is provided to explain the observed time-domain features using the group delay of the leaky wave.