Browsing by Subject "moisture damage"
Now showing 1 - 3 of 3
Results Per Page
Sort Options
Item Application of surface energy measurements to evaluate moisture susceptibility of asphalt and aggregates(Texas A&M University, 2005-08-29) Zollinger, Corey JamesMoisture damage in asphalt mixes can be defined as loss of strength and durability due to the presence of moisture at the binder-aggregate interface (adhesive failure) or within the binder (cohesive failure). This research focuses on the evaluation of the susceptibility of aggregates and asphalts to moisture damage through understanding the micro-mechanisms that influence the adhesive bond between aggregates and asphalt and the cohesive strength and durability of the binder. Moisture damage susceptibility is assessed using surface energy measurements and dynamic mechanical analysis (DMA). Surface energy is defined as the energy needed to create a new unit surface area of material in vacuum condition. Surface energy measurements are used to compute the adhesive bond strength between the aggregates and asphalt and cohesive bond strength in the binder. DMA testing is used to evaluate the rate of damage accumulation in asphalt binders and mastics. The DMA applies a cyclic, torsional strain controlled loading to cylindrical asphalt mastics until failure. The DMA results are analyzed using continuum damage mechanics that focuses on separating the energy expended in damaging the material from that associated with viscoelastic deformation. A new approach is developed to analyze the DMA results and calculate the rate of damage. The developed approach is used to evaluate six asphalt mixtures which have performed either well or poorly in the field. The resistance of the field mixes to moisture damage is shown to be related to the calculations of bind energies and the accumulated damage in the DMA.Item Evaluation of moisture damage within asphalt concrete mixes(Texas A&M University, 2004-09-30) Shah, Brij D.Pavements are a major part of the infrastructure in the United States. Moisture damage of these pavements is a significant problem. To predict and prevent this kind of moisture damage a great deal of research has been performed on this issue in past. This study validates an analytical approach based on surface energy aimed at assessing moisture damage. Two types of bitumen and three aggregates are evaluated in the study. The two types of bitumen represent very different chemical extremes and the three aggregates (a limestone, siliceous gravel, and granite) represent a considerable range in mineralogy. Moisture damage was monitered as a change in dynamic modulus with load cycles. The analysis demonstrates the need to consider mixture compliance as well as bond energy in order to predict moisture damage. Mixtures with the two types of bitumen and each aggregate with and without hydrated lime were evaluated. The hydrated lime substantially improved the resistance of the mixture to moisture damage.Item Influence of fundamental material properties and air void structure on moisture damage of asphalt mixes(2009-05-15) Arambula Mercado, EdithMoisture damage in asphalt mixes refers to the loss of serviceability due to the presence of moisture. The extent of moisture damage, also called moisture susceptibility, depends on internal and external factors. The internal factors relate to the properties of the materials and the microstructure distribution, while the external factors include the environmental conditions, production and construction practices, pavement design, and traffic level. The majority of the research on moisture damage is based on the hypothesis that infiltration of surface water is the main source of moisture. Of the two other principal mechanisms of water transport, permeation of water vapor and capillary rise of subsurface water, the latter has been least explored. A laboratory test and analysis methods based on X-ray computed tomography (CT) were established to assess the capillary rise of water. The amount and size of air voids filled with water were used in the capillary rise equation to estimate the distribution of the contact angles between the water and the mastic. The results were able to show the influence of air void size on capillary rise and contact angles. The relationship between air void structure and moisture susceptibility was evaluated using a fundamental fracture model based on dissipated energy of viscoelastic materials. Detailed description is provided in this dissertation on the deduction of the model equation, the selection of the model parameters, and the required testing protocols. The model parameters were obtained using mechanical tests and surface energy measurements. The microstructure of asphalt mixes prepared in the laboratory having different air void structures was captured using X-ray CT, and image analysis techniques were used to quantify the air void structure and air void connectivity. The air void structure was found to influence the mix resistance to moisture damage. To validate the fracture model, asphalt mixes with known field performance were tested. The results demonstrated that the fracture model is an effective tool to characterize moisture susceptibility. In addition, the model showed good correlation with the reported field performance of the asphalt mixes. The findings of this study will be useful to highway engineers to evaluate asphalt mixes with alternative mix designs and internal air void structures and to estimate the rate of moisture infiltration in order to maximize the resistance of asphalt mixes to moisture damage.