Browsing by Subject "fuel assembly"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Pwr fuel assembly optimization using adaptive simulated annealing coupled with translat(2009-05-15) Rogers, Timothy JamesOptimization methods have been developed and refined throughout many scientific fields of study. This work utilizes one such developed technique of optimization called simulated annealing to produce optimal operation parameters for a 15x15 fuel assembly to be used in an operating nuclear power reactor. The two main cases of optimization are: one that finds the optimal 235U enrichment layout of the fuel pins in the assembly and another that finds both the optimal 235U enrichments where gadolinium burnable absorber pins are also inserted. Both of these optimizations can be performed by coupling Adaptive Simulated Annealing to TransLAT which successfully searches the optimization space for a fuel assembly layout that produces the minimized pin power peaking factor. Within given time constraints this package produces optimal layouts within a given set of assumptions and constraints. Each layout is forced to maintain the fuel assembly average 235U enrichment as a constraint. Reductions in peaking factors that are produced through this method are on the order of 2% to 3% when compared to the baseline results. As with any simulated annealing approach, families of optimal layouts are produced that can be used at the engineer?s discretion.Item Thermal-Hydraulic Analysis of Advanced Mixed-Oxide Fuel Assemblies with VIPRE-01(2010-07-14) Bingham, Adam R.Two new fuel assembly designs for light water reactors using advanced mixed-oxide fuels have been proposed to reduce the radiotoxicity of used nuclear fuel discharged from nuclear power plants. The research efforts of this thesis are the first to consider the effects of burnup on advanced mixed-oxide fuel assembly performance and thermal safety margin over an assembly?s expected operational burnup lifetime. In order to accomplish this, a new burnup-dependent thermal-hydraulic analysis methodology has been developed. The new methodology models many of the effects of burnup on an assembly design by including burnup-dependent variations in fuel pin relative power from neutronic calculations, assembly power reductions due to fissile content depletion and core reshuffling, and fuel material thermal-physical properties. Additionally, a text-based coupling method is developed to facilitate the exchange of information between the neutronic code DRAGON and thermal-hydraulic code VIPRE-01. The new methodology effectively covers the entire assembly burnup lifetime and evaluates the thermal-hydraulic performance against ANS Condition I, II, and III events with respect to the minimum departure from nucleate boiling ratio, peak cladding temperatures, and fuel centerline temperatures. A comprehensive literature survey on the thermal conductivity of posed fuel materials with burnup-dependence has been carried out to model the advanced materials in the thermal-hydraulic code VIPRE-01. Where documented conductivity values are not available, a simplified method for estimating the thermal conductivity has been developed. The new thermal conductivity models are based on established FRAPCON-3 fuel property models used in the nuclear industry, with small adjustments having been made to account for actinide additions. Steady-state and transient thermal-hydraulic analyses are performed with VIPRE- 01 for a reference UO2 assembly design, and two advanced mixed-oxide fuel assembly designs using the new burnup-dependent thermal-hydraulic analysis methodology. All three designs maintain a sufficiently large thermal margin with respect to the minimum departure from nucleate boiling ratio, and maximum cladding and fuel temperatures during partial and complete loss-of-flow accident scenarios. The presence of a thin (Am,Zr)O2 outer layer on the fuel pellet in the two advanced mixed-oxide fuel assembly designs increases maximum fuel temperatures during transient conditions, but does not otherwise greatly compromise the thermal margin of the new designs.