Browsing by Subject "electrochemistry"
Now showing 1 - 4 of 4
Results Per Page
Sort Options
Item Chemisorption of Aromatic Compounds on Well-Defined Palladium Surfaces: Studies by Electron Spectroscopy and Electrochemistry(2010-10-12) Li, DingThe chemisorption of aromatic compounds, derivatized with different functional groups, on well-defined Pd(111) surfaces was studied by a combination of Auger electron spectroscopy (AES), low energy electron diffraction (LEED), high resolution electron energy loss spectroscopy (HREELS), and electrochemistry (EC). The results of this work led to the following trends and conclusions: (a) At low concentrations, 2,5-dihydroxythiophenol (DHT) chemisorbs on a Pd surface through both diphenolic ring and thiol group. At high concentrations, it chemisorbs only through the thiol group. (b) There is extensive intermolecular attraction between the co-adsorbed thiolated quinone and thiolated hydroquinone molecules. The interaction occurs through the Pd substrate and not through space. (c) The chemisorption properties of Nheteroaromatic compounds are pH-dependent. When the nitrogen heteroatom is protonated, it becomes very weakly surface-active. When the nitrogen heteroatom is deprotonated, surface activity stronger than the diphenolic ring is exhibited. (d) On a palladium surface, the binding strengths of ligands increase in the order: phenyl ring < quinonoid ring, < N-heteroatom < I < -SH.Item Cyanide clusters of ReII with 3d metal ions and their magnetic properties: incorporating anisotropic ions into metal-cyanide clusters with high spin magnetic ground states(Texas A&M University, 2005-08-29) Schelter, Eric JohnClusters of metal ions that possess large numbers of magnetically coupled unpaired electrons have attracted much interest in recent years due to their fascinating magnetic behavior. With an appreciable component of magnetic anisotropy, these large-spin paramagnetic molecules can exhibit an energy barrier to inversion of their magnetic dipole, leading to spontaneous magnetization and magnetic hysteresis below a critical temperature. Since this behavior is a property of an individual clusters rather than a collection of molecules, this phenomenon has been dubbed ??Single Molecule Magnetism??. Our approach to the study of new high-spin systems has been to exert a measure of synthetic control in the preparation of clusters. Specifically we are employing highly anisotropic metal ions with the anticipation that these ions would engender large overall magnetic anisotropy in the resulting clusters. The first step in this process was the development of the chemistry of two new d5 ReII (S = ??) complexes, namely [ReII(triphos)(CH3CN)3][PF6]2 and [Et4N][ReII(triphos)(CN)3]. The magnetic, optical and electrochemical properties were studied and theoretical models were developed to describe the origin of the large temperature independent paramagnetism that was observed. Next, we successfully employed transition metal cyanide chemistry using the ReII building blocks to prepare a family of isostructural, cubic clusters of the general formula {[MCl]4[Re(triphos)(CN)3]4} M = Mn, Fe, Co, Ni, Cu, Zn whose 3d ions adopt local tetrahedral geometries. Within the clusters, magnetic exchange is observed between the paramagnetic ions, which has been modeled using an Ising exchange model to account for the dominating anisotropy of the ReII ion. Despite the high pseudo-symmetry of the clusters (Td), this work has yielded a rare example of a metal-cyanide single molecule magnet, {[MCl]4[Re(triphos)(CN)3]4} with an S = 8 ground state, D = -0.39 cm-1 and an effective energy barrier for magnetization reversal of Ueff = 8.8 cm-1. The elucidation of this family of isostructural clusters has also allowed us to pursue fundamental work on the structure/property relationships of the exotic, paramagnetic ReII ion. As the clusters are soluble, stable compounds, the future of this chemistry lies in the development of a true building-block approach to ??super-clusters?? that exhibit very high ground state spin values.Item Studies of Platinum Polyynyl Complexes: Elaboration of Novel "Click" Cycloadducts and Fluorous and Polygon Based Platinum Polyyndiyl Systems(2012-11-13) Clough, Melissa Catherine 1985-The major directions of this dissertation involve (1) the syntheses and characterization of molecular polygons incorporating sp1hybridized carbon linkers and L2Pt corners (L2 = cis-1,3-diphosphine), (2) the development of protected carbon chain complexes featuring fluorous phosphine ligands and (3) click reactions of metal terminal polyynyl complexes and further metallations of the resulting triazole rings. A brief overview is provided in Chapter I. Chapter II details the syntheses of molecular squares containing bidendate diphosphine ligands of the formula R2C(CH2PPh2)2 where R = Me, Et, n-Bu, n-Dec, Bn, and p-tolCH2 (general designation dppp*), in which the R2 groups are intended to circumvent the solubility issues encountered by others. Their syntheses involve double substitutions of the dimesylate compounds R2C(CH2OMs)2 using KPPh2. Building blocks of the formulae (dppp*)PtCl2 and (dppp*)Pt((C?C)2H)2 are synthesized and characterized, including one crystal structure of the latter. The target complexes are accessed by reactions of (dppp*)PtCl2 with (dppp*)Pt((C?C)2H)2 under Sonogashira type conditions. Six new squares of the formula [(R2C(CH2PPh2)2)Pt(C?C)2]4 are characterized including two crystal structures. Further topics include approaches to higher homologues and cyclocarbon synthesis. Chapter III focuses on carbon chain complexes bearing fluorous phosphine ligands of the formula P((CH2)mRfn)3 (Rfn = (CF2)n-1CF3; m/n = 2/8, 3/8, and 3/10). Precursors of the formula trans-(C6F5)((Rfn(CH2)m)3P)2PtCl are synthesized and characterized, including one crystal structure, which reveals phase separation of the fluorous and non-fluorous domains. Reactions with butadiyne give trans-(C6F5)((Rfn(CH2)m)3P)2Pt(C?C)2H. Oxidative homocouplings afford the target complexes trans,trans-(C6F5)((Rfn(CH2)m)3P)2Pt(C?C)4(C6F5)(P((CH2)mRfn)3)2Pt. Cyclic voltammetry indicates irreversible oxidations of the title compounds, in contrast to partially reversible oxidations of non-fluorous analogues. Chapter IV focuses on multimetallic complexes achieved by click reactions in metal coordination spheres. The copper catalyzed click reaction between trans-(C6F5)(p-tol3P)2Pt(C?C)2H (1) and (?5-C5H4N3)Re(CO)3 affords the bimetallic 1,2,3-triazole trans-C6F5)(p1tol3P)2PtC?CC=CHN((?51C5H4)Re(CO)3)N=N. Further reactions with Re(CO)5OTf and Re(CO)5Br give trimetallated adducts, which represent the first species of this type. An alternative route to a trimetallic complex involves the twofold cycloaddition of the diazide (?5-C5H4N3)2Fe and 1, giving (?5-C5H4NN=N-C(trans-(C?C)Pt(Pp-tol3)2(C6F5)=CH)2Fe. The crystal structures of the di and trimetallic complexes are compared, but attempts to achieve a fourth metallation involving the =CH groups are unsuccessful. However, when the triazolium salt [trans-(C6F5)(p-tol3P)2PtC?CC=CHN(CH2C6H5)N=N(Me)]+ I? is treated with Ag2O and [Rh(COD)Cl]2, a =CRh adduct is obtained. The success of =CH metallation is correlated to the 1H NMR chemical shift, indicative of an electronic effect.Item Synthesis and electrochemical characterization of highly monodisperse dendrimer-templated monolayer protected clusters(Texas A&M University, 2006-04-12) Kim, Yong-GuWe described the synthesis of multilayer organic thin films prepared by sequential vapor-phase coupling of monomers. The reactions were carried out at room temperature and atmospheric pressure. Films prepared using up to six sequential coupling reactions are reported. Homobifunctionalized monomers, such as hexamethylenediamine, react primarily via a single endgroup rather than cross coupling to the reactive surface via both reactive groups. We synthesized bifunctionalized polyamidoamine (PAMAM) dendrimers having both quaternary ammonium groups and primary amines on their periphery were prepared. The high positive charge on the surface of these dendrimers prevents agglomeration, and the unquanternized amine groups provide a reactive handle for immobilizing the dendrimer-encapsulated nanoparticles onto surfaces. We prepared highly monodisperse, 1-2 nm diameter Au nanoparticles using bifunctionalized PAMAM dendrimers as templates. The synthesis is carried out in water, takes less than 30 min, and requires no subsequent purification. The high monodispersity is a function of the template synthesis, which avoids size variations arising from random nucleation and growth phenomena, and the use of magic number equivalent ratios of AuCl4-/dendrimer. We investigated the electrochemical properties of Au, Pd and PdAu monolayer-protected clusters (MPCs), prepared by dendrimer-templating and subsequent extraction, are described. Purification of the extracted Au, Pd and PdAu nanoparticles was not required to obtain well-defined differential pulse voltammetry peaks arising from quantized double-layer charging. The calculated sizes of the nanoparticles were essentially identical to those determined from the electrochemical data. The capacitance of the particles was independent of the composition of core metal.