Browsing by Subject "dB"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item A 3.125 Gb/s 5-TAP CMOS Transversal Equalizer(2010-07-14) Lopez-Rivera, Marcos L.Recently, there is growing interest in high speed circuits for broadband communication, especially in wired networks. As the data rate increases beyond 1 GB/s conventional materials used as communication channels such as PCB traces, coaxial cables, and unshielded twisted pair (UTP) cables, etc. attenuate and distort the transmitted signal causing bit errors in the receiver end. Bit errors make the communication less reliable and in many cases even impossible. The goal of this work was to analyze, and design an channel equalizer capable of restoring the received signal back to the original transmitted signal. The equalizer was designed in a standard CMOS 0.18 ?m process and it is capable of compensating up to 20 dB?s of attenuation at 1.5625 GHz for 15 and 20 meters of RG-58 A/U coaxial cables. The equalizer is able to remove 0.5 UI ( 160 ps ) of peak-to-peak jitter and output a signal with 0.1 UI ( 32 ps ) for 15 meters of cable at 3.125 Gb/s. The equalizer draws 18 mA from a 1.8 V power supply which is lower than publications [1, 2] for CMOS transversal equalizers.Item Fluidic Tuning of a Four-Arm Spiral-Based Frequency Selective Surface(2011-08-08) Wells, Elizabeth ChristineFrequency selective surfaces (FSSs) provide a variety of spatial filtering functions, such as band-pass or band-stop properties in a radome or other multilayer structure. This filtering is typically achieved through closely-spaced periodic arrangements of metallic shapes on top of a dielectric substrate (or within a stack of dielectric materials). In most cases, the unit cell size, its shape, the substrate parameters, and the inter-element spacing collectively impact the response of the FSS. Expanding this design space to include reconfigurable FSSs provides opportunities for applications requiring frequency agility and/or other properties. Tuning can also enable operation over a potentially wider range of frequencies and can in some cases be used as a loading mechanism or quasi-ground plane. Many technologies have been considered for this type of agility (RF MEMS, PIN diodes, etc.). This includes the recent use of microfluidics and dispersions of nanoparticles, or fluids with controllable dielectrics, which have entered the design space of numerous other EM applications including stub-tuners, antennas, and filters. In this work they provide a material based approach to reconfiguring an FSS. An FSS based on a four-arm spiral with tunable band-stop characteristics is presented in this work. A thin colloidal dispersion above each element provides this tuning capability. The radial expansion and contraction of this dispersion, as well as the variable permittivity of the dispersion, are used to load each element individually. This design incorporates thin fluidic channels within a PDMS layer below the substrate leading to individual unit cells that provide a closed pressure-driven subsystem that contains the dispersion. With the capability to individually control each cell, groups of cells can be locally altered (individually or in groups) to create gratings and other electromagnetically agile features across the surface or within the volume of a radome or other covering. Simulations and measurements of an S-band tunable design using colloidal Barium Strontium Titanate dispersed Silicone oil are provided to demonstrate the capability to adjust the stop-band characteristics of the FSS across the S-band.