Browsing by Subject "Transmission line"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item A PLL Design Based on a Standing Wave Resonant Oscillator(2011-10-21) Karkala, VinayIn this thesis, we present a new continuously variable high frequency standing wave oscillator and demonstrate its use in generating the phase locked clock signal of a digital IC. The ring based standing wave resonant oscillator is implemented with a plurality of wires connected in a mobius configuration, with a cross coupled inverter pair connected across the wires. The oscillation frequency can be modulated by coarse and fine tuning. Coarse modification is achieved by altering the number of wires in the ring that participate in the oscillation, by driving a digital word to a set of passgates which are connected to each wire in the ring. Fine tuning of the oscillation frequency is achieved by varying the body bias voltage of both the PMOS transistors in the cross coupled inverter pair which sustains the oscillations in the resonant ring. We validated our PLL design in a 90nm process technology. 3D parasitic RLCs for our oscillator ring were extracted with skin effect accounted for. Our PLL provides a frequency locking range from 6 GHz to 9 GHz, with a center frequency of 7.5 GHz. The oscillator alone consumes about 25 mW of power, and the complete PLL consumes a power of 28.5 mW. The observed jitter of the PLL is 2.56 percent. These numbers are significant improvements over the prior art in standing wave based PLLs.Item Forecasting congestion in transmission line and voltage stability with wind integration(2011-08) Kang, Han; Baldick, Ross; Grady, William M.Due to growth of wind power, system operators are being challenged by the integration of large wind farms into their electrical power systems. Large scale wind farm integration has adverse effects on the power system due to its variable characteristic. These effects include two main aspects: voltage stability and active line flow. In this thesis, a novel techniques to forecast active line flow and select pilot bus are introduced with wind power integration. First, this thesis introduces a methodology to forecast congestion in the transmission line with high wind penetration. Since most wind resources tend to be located far away form the load center, the active line flow is one of the most significant aspects when wind farm is connected to electrical grid. By providing the information about the line flow which can contribute to transmission line congestion, the system operators would be able to respond such as by requesting wind power or load reduction. The second objective of this thesis is to select the weakest bus, called pilot bus, among all load buses. System reliability, especially voltage stability, can be adversely affected by wind variability. In order to ensure reliable operation of power systems with wind power integration, the index to select the pilot bus is developed, and further prediction of voltage profile at the pilot bus is fulfilled. The objective function to select the pilot bus takes account of the N-1 contingency analysis, loading margin, and reactive power sensitivity. Through on the objective function, the pilot bus is representative of all load buses as well as controllable by reactive power regulation. Predicting the voltage profile at the pilot bus is also useful for system operators to determine wind power output.