Browsing by Subject "Timoshenko beam theory"
Now showing 1 - 3 of 3
Results Per Page
Sort Options
Item Analytical Study on Adhesively Bonded Joints Using Peeling Test and Symmetric Composite Models Based on Bernoulli-Euler and Timoshenko Beam Theories for Elastic and Viscoelastic Materials(2012-02-14) Su, Ying-YuAdhesively bonded joints have been investigated for several decades. In most analytical studies, the Bernoulli-Euler beam theory is employed to describe the behaviour of adherends. In the current work, three analytical models are developed for adhesively bonded joints using the Timoshenko beam theory for elastic material and a Bernoulli-Euler beam model for viscoelastic materials. One model is for the peeling test of an adhesively bonded joint, which is described using a Timoshenko beam on an elastic foundation. The adherend is considered as a Timoshenko beam, while the adhesive is taken to be a linearly elastic foundation. Three cases are considered: (1) only the normal stress is acting (mode I); (2) only the transverse shear stress is present (mode II); and (3) the normal and shear stresses co-exist (mode III) in the adhesive. The governing equations are derived in terms of the displacement and rotational angle of the adherend in each case. Analytical solutions are obtained for the displacements, rotational angle, and stresses. Numerical results are presented to show the trends of the displacements and rotational angle changing with geometrical and loading conditions. In the second model, the peeling test of an adhesively bonded joint is represented using a viscoelastic Bernoulli-Euler beam on an elastic foundation. The adherend is considered as a viscoelastic Bernoulli-Euler beam, while the adhesive is taken to be a linearly elastic foundation. Two cases under different stress history are considered: (1) only the normal stress is acting (mode I); and (2) only the transverse shear stress is present (mode II). The governing equations are derived in terms of the displacements. Analytical solutions are obtained for the displacements. The numerical results show that the deflection increases as time and temperature increase. The third model is developed using a symmetric composite adhesively bonded joint. The constitutive and kinematic relations of the adherends are derived based on the Timoshenko beam theory, and the governing equations are obtained for the normal and shear stresses in the adhesive layer. The numerical results are presented to reveal the normal and shear stresses in the adhesive.Item Nonlinear Analysis of Beams Using Least-Squares Finite Element Models Based on the Euler-Bernoulli and Timoshenko Beam Theories(2010-07-14) Raut, Ameeta A.The conventional finite element models (FEM) of problems in structural mechanics are based on the principles of virtual work and the total potential energy. In these models, the secondary variables, such as the bending moment and shear force, are post-computed and do not yield good accuracy. In addition, in the case of the Timoshenko beam theory, the element with lower-order equal interpolation of the variables suffers from shear locking. In both Euler-Bernoulli and Timoshenko beam theories, the elements based on weak form Galerkin formulation also suffer from membrane locking when applied to geometrically nonlinear problems. In order to alleviate these types of locking, often reduced integration techniques are employed. However, this technique has other disadvantages, such as hour-glass modes or spurious rigid body modes. Hence, it is desirable to develop alternative finite element models that overcome the locking problems. Least-squares finite element models are considered to be better alternatives to the weak form Galerkin finite element models and, therefore, are in this study for investigation. The basic idea behind the least-squares finite element model is to compute the residuals due to the approximation of the variables of each equation being modeled, construct integral statement of the sum of the squares of the residuals (called least-squares functional), and minimize the integral with respect to the unknown parameters (i.e., nodal values) of the approximations. The least-squares formulation helps to retain the generalized displacements and forces (or stress resultants) as independent variables, and also allows the use of equal order interpolation functions for all variables. In this thesis comparison is made between the solution accuracy of finite element models of the Euler-Bernoulli and Timoshenko beam theories based on two different least-square models with the conventional weak form Galerkin finite element models. The developed models were applied to beam problems with different boundary conditions. The solutions obtained by the least-squares finite element models found to be very accurate for generalized displacements and forces when compared with the exact solutions, and they are more accurate in predicting the forces when compared to the conventional finite element models.Item Nonlinear Analysis of Conventional and Microstructure Dependent Functionally Graded Beams under Thermo-mechanical Loads(2012-10-19) Arbind, ArchanaNonlinear finite element models of functionally graded beams with power-law variation of material, accounting for the von-Karman geometric nonlinearity and temperature dependent material properties as well as microstructure dependent length scale have been developed using the Euler-Bernoulli as well as the first-order and third- order beam theories. To capture the size effect, a modified couple stress theory with one length scale parameter is used. Such theories play crucial role in predicting accurate deflections of micro- and nano-beam structures. A general third order beam theory for microstructure dependent beam has been developed for functionally graded beams for the first time using a modified couple stress theory with the von Karman nonlinear strain. Finite element models of the three beam theories have been developed. The thermo-mechanical coupling as well as the bending-stretching coupling play significant role in the deflection response. Numerical results are presented to show the effect of nonlinearity, power-law index, microstructural length scale, and boundary conditions on the bending response of beams under thermo-mechanical loads. In general, the effect of microstructural parameter is to stiffen the beam, while shear deformation has the effect of modeling more realistically as a flexible beam.