Browsing by Subject "Supercapacitors"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Carbon based materials for electrodes in electrochemical double layer capacitors(2012-12) Murali, Shanthi; Ruoff, Rodney S.; Goodenough, John B.; Bielawski, Christopher W.; Korgel, Brian A.; Johnston, Keith P.Electrochemical double layer capacitors (EDLCs, also called supercapacitors or ultracapacitors) are high power density energy storage devices that operate through the separation of charge at the electrochemical interface between an electrode and a supporting electrolyte. Numerous types of carbon materials with high surface area and internal porosity, such as activated carbon, carbon fabrics, nanotubes, and reduced graphene oxide have been studied as electrode materials. Electrolytes such as aqueous alkaline and acid solutions usually give high capacitance, while organic and ionic liquids provide a wider operation voltage. Graphene, due to its high theoretical surface area of 2630 m2/g, good electrical conductivity, and relatively low density, is being studied as an electrode material in EDLCs. The objective of this dissertation is thus to study effective methods for synthesis of graphene-based materials, and to investigate their behavior in EDLCs. This work explored microwave assisted synthesis of graphite oxide (‘MEGO’, prepared in less than one minute by irradiation of graphite oxide by microwave). This material was further chemically activated to obtain a unique carbon material, activated microwave exfoliated graphite oxide (‘a-MEGO’) with specific surface areas up to 3100 m2/g. Gas adsorption measurements were used to study the specific surface area and porosity of a set of a-MEGO samples, which were also studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) for their structure, and by combustion analysis (i.e., elemental analysis) and X-ray photoelectron spectroscopy (XPS) to understand their elemental composition. Cyclic voltammetry (CV), galvanostatic charge/discharge, and frequency response, tests were done in order to study the performance of these new carbon materials as electrodes in both aqueous and organic electrolytes in a two electrode cell set up.Item Conducting polymer hydrogels for high-performance electrochemical devices(2014-05) Liu, Borui; Yu, Guihua (Assistant professor)Conducting polymer hydrogels (CPHs) is a class of unique materials that synergize the advantages of conducting polymers (CPs) and polymer hydrogels together. It has been employed in many high-performance electrochemical devices for years, such as energy storage and biosensors. However, large limitations of applying CPHs into the abovementioned areas have been facing the researcher for a long time, mainly due to the difficulties from complicated materials synthesis and untenable nanostructures for potential applications. The drawbacks of previously reported CPHs have put numerous disadvantages onto their applications, partially because they have, for example, high prices, untunable microscale or nanoscale architectures, environmentally hazardous properties, and unscalable and time-consuming synthesis processes. In this thesis, we proposed a novel route for carrying out CPHs by one-step organics synthesis at ambient conditions. The CPHs have hierarchically porous nanostructures crosslinked in a three-dimensional (3D) way, which enable its stable mechanical, unique chemical and physical properties, and outstanding electrochemical properties for potential applicability in long-term energy storage devices and highly sensitive biosensors. With highly controllable nanostructures of the CPHs, our novel concept and material system could possibly be utilized in a broad range of electrochemical applications, including but not limited to lithium-ion batteries (LIBs) electrodes, electrochemical capacitors (ECs), biofuel cells, medical electrodes, printable electronic devices, and biosensors.