Browsing by Subject "Soil improvement"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Effect of prefabricated vertical drains on pore water pressure generation and dissipation in liquefiable sand(2010-05) Marinucci, Antonio; Rathje, Ellen M.; Stokoe II, Kenneth H.; Wilson, Clark; Gilbert, Robert; Zornberg, JorgeSoil improvement methods are used to minimize the consequences of liquefaction by changing the characteristics and/or response of a liquefiable soil deposit. When considering sites with previous development, the options for soil improvement are limited. Traditional methods, such as compaction and vibratory techniques, are difficult to employ because of adverse effects on adjacent structures. One potential method for soil improvement against soil liquefaction in developed sites is accelerated drainage through in situ vertical drains. Vertical drains expedite the dissipation of excess pore water pressures by reducing the length of the pore water drainage path. For more than thirty years, vertical gravel drains or stone columns have been employed to ensure the excess pore water pressure ratio remains below a prescribed maximum value. In recent years, the use of prefabricated vertical drains (PVDs) has increased because the drains can be installed with less site disruption than with traditional soil improvement methods. To date, little-to-no field or experimental verification is available regarding the seismic performance of sites treated with PVDs. The effectiveness of PVDs for liquefaction remediation was evaluated via small-scale centrifuge testing and full-scale field testing. A small-scale centrifuge test was performed on an untreated soil deposit and on a soil deposit treated with small-scale vertical drains. Compared to the untreated condition, the presence of the small-scale vertical drains provided numerous benefits including smaller magnitudes of excess pore water pressure generation and buildup, smaller induced cyclic shear strains, reduced times for pore pressure dissipation, and smaller permanent horizontal and vertical displacements. In addition, full-scale in situ field experiments were performed in an untreated soil deposit and in a soil deposit treated with full-scale PVDs using a vibrating mandrel as the dynamic source. In the untreated test area, the maximum induced excess pore pressure ratio reached about 0.95. In the treated test area, the vibratory installation of the first few drains generated significant excess pore pressures; however, significant excess pore pressures were not generated during the vibratory installation of additional drains because of the presence of the adjacent drains. Additionally, the vibratory installation of the drains caused significant settlement and significantly altered the shear wave velocity of the sand. Dynamic shaking after installation of all of the drains induced small accelerations, small cyclic shear strains, and negligible excess pore water pressures in the soil. The results of the field experiment indicate that the prefabricated vertical drains were effective at dissipating excess pore water pressures during shaking and densifying the site.Item Undrained, monotonic shear strength of loose, saturated sand treated with a thixotropic bentonite suspension for soil improvement(2010-08) Rugg, Dennis A.; El Mohtar, Chadi Said; Rathje, Ellen M.Liquefaction is a phenomenon that occurs in loose saturated sand deposits that are subjected to earthquake loading. This phenomenon can cause massive displacements and significant destruction. Many methods for mitigating liquefaction have been proposed and investigated including compaction, drainage, and grouting. One such liquefaction mitigation technique involves the addition of bentonite fines to the pore spaces of a loose, saturated sand via permeation of an engineered clay suspension. This method of soil improvement has provided the basis and motivation for this research. Also, the effect of plastic and non-plastic fines on the static and cyclic response of sands is somewhat contradictory throughout the literature. Thus, the primary objective of this study was to characterize the affect of an engineered bentonite pore fluid on the undrained monotonic response of loose, saturated Ottawa sand in order to determine its feasibility for use as an effective method for liquefaction mitigation. The permeation of engineered bentonite suspensions is proposed as a passive site remediation technique. Thus, the suspensions were delivered to loose Ottawa sand specimens in the laboratory by permeation in a newly designed three-way split mold. This split mold was used to create easily tested specimens that would have an initial soil fabric similar to that expected after permeation in the field. The bentonite suspensions were treated with sodium pyrophosphate to reduce the initial yield stress and viscosity in order to allow for permeation. Three different bentonite suspensions were utilized throughout this study each having different properties and delivering slightly different amounts of bentonite to the loose, saturated sand. The affect of this engineered pore fluid on the undrained shear response of loose, saturated Ottawa sand was compared to the undrained shear response of clean sand and dry-mixed sand and bentonite. The specimen preparation method (dry-mixed or permeated) was shown to have a significant effect on the response of the sand specimens. While the dry-mixed specimens produced larger and more sustained positive pore water pressures than the clean sand (resulting in an increased tendency to flow), the permeated specimens showed a marked decrease in the generation of excess pore water pressures, displayed a more dilative response, and thus resulted in a soil structure that was less likely to flow. Finally, the results of tests on specimens permeated with engineered bentonite suspensions show that there is little to no change in the effective friction angle at critical state. A method for effectively testing permeated soil specimens was developed in this study. This method has laid the framework for further investigations into the use of engineered bentonite suspensions for liquefaction mitigation by permeation grouting.