Browsing by Subject "Reinforced concrete bridges"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Adaptive Reliability Analysis of Reinforced Concrete Bridges Using Nondestructive Testing(2011-08-08) Huang, QindanThere has been increasing interest in evaluating the performance of existing reinforced concrete (RC) bridges just after natural disasters or man-made events especially when the defects are invisible, or in quantifying the improvement after rehabilitations. In order to obtain an accurate assessment of the reliability of a RC bridge, it is critical to incorporate information about its current structural properties, which reflects the possible aging and deterioration. This dissertation proposes to develop an adaptive reliability analysis of RC bridges incorporating the damage detection information obtained from nondestructive testing (NDT). In this study, seismic fragility is used to describe the reliability of a structure withstanding future seismic demand. It is defined as the conditional probability that a seismic demand quantity attains or exceeds a specified capacity level for given values of earthquake intensity. The dissertation first develops a probabilistic capacity model for RC columns and the capacity model can be used when the flexural stiffness decays nonuniformly over a column height. Then, a general methodology to construct probabilistic seismic demand models for RC highway bridges with one single-column bent is presented. Next, a combination of global and local NDT methods is proposed to identify in-place structural properties. The global NDT uses the dynamic responses of a structure to assess its global/equivalent structural properties and detect potential damage locations. The local NDT uses local measurements to identify the local characteristics of the structure. Measurement and modeling errors are considered in the application of the NDT methods and the analysis of the NDT data. Then, the information obtained from NDT is used in the probabilistic capacity and demand models to estimate the seismic fragility of the bridge. As an illustration, the proposed probabilistic framework is applied to a reinforced concrete bridge with a one-column bent. The result of the illustration shows that the proposed framework can successfully provide the up-to-date structural properties and accurate fragility estimates.Item Effect of cumulative seismic damage and corrosion on life-cycle cost of reinforced concrete bridges(2009-05-15) Kumar, RameshBridge design should take into account not only safety and functionality, but also the cost effectiveness of investments throughout a bridge life-cycle. This work presents a probabilistic approach to compute the life-cycle cost (LCC) of corroding reinforced concrete (RC) bridges in earthquake prone regions. The approach is developed by combining cumulative seismic damage and damage associated to corrosion due to environmental conditions. Cumulative seismic damage is obtained from a low-cycle fatigue analysis. Chloride-induced corrosion of steel reinforcement is computed based on Fick?s second law of diffusion. The proposed methodology accounts for the uncertainties in the ground motion parameters, the distance from source, the seismic demand on the bridge, and the corrosion initiation time. The statistics of the accumulated damage and the cost of repairs throughout the bridge life-cycle are obtained by Monte-Carlo simulation. As an illustration of the proposed approach, the effect of design parameters on the life-cycle cost of an example RC bridge is studied. The results are shown to be valuable in better estimating the condition of existing bridges (i.e., total accumulated damage at any given time) and, therefore, can help schedule inspection and maintenance programs. In addition, by taking into consideration the deterioration process over a bridge life-cycle, it is possible to make an estimate of the optimum design parameters by minimizing, for example, the expected cost throughout the life of the structure.