Browsing by Subject "Permittivity"
Now showing 1 - 3 of 3
Results Per Page
Sort Options
Item A Broadband Miniaturized Microwave Dielectric Spectroscopy System Based on Impedance Sensing(2013-01-07) Kabiri, Saman 1988-The main purpose of this thesis is to propose a broadband miniaturized spectroscopy system to detect dielectric constant and loss tangent of lossy organic materials at RF/Microwave frequencies. Complex permittivities of lossy liquids are measured using voltage variations across a sensing element embedded in a capacitive divider circuit. The methodology for characterization of complex permittivity of materials is explained in detail. The proposed method provides a unique detection algorithm to extract the dielectric constant and loss tangent of an unknown material exposed to the sensor. The complex permittivity of binary organic mixtures have been extracted to an accuracy better than 5% using sample volumes of 200-300 ?L within the frequency range of 1-2 GHz. The results obtained from the measurements are compared to the reported values, and their agreements are presented in this work. To the best of the authors? knowledge, this is the first work presented for broadband miniaturized self-sustained complex permittivity spectroscopy at microwave frequencies.Item Fluidic Tuning of a Four-Arm Spiral-Based Frequency Selective Surface(2011-08-08) Wells, Elizabeth ChristineFrequency selective surfaces (FSSs) provide a variety of spatial filtering functions, such as band-pass or band-stop properties in a radome or other multilayer structure. This filtering is typically achieved through closely-spaced periodic arrangements of metallic shapes on top of a dielectric substrate (or within a stack of dielectric materials). In most cases, the unit cell size, its shape, the substrate parameters, and the inter-element spacing collectively impact the response of the FSS. Expanding this design space to include reconfigurable FSSs provides opportunities for applications requiring frequency agility and/or other properties. Tuning can also enable operation over a potentially wider range of frequencies and can in some cases be used as a loading mechanism or quasi-ground plane. Many technologies have been considered for this type of agility (RF MEMS, PIN diodes, etc.). This includes the recent use of microfluidics and dispersions of nanoparticles, or fluids with controllable dielectrics, which have entered the design space of numerous other EM applications including stub-tuners, antennas, and filters. In this work they provide a material based approach to reconfiguring an FSS. An FSS based on a four-arm spiral with tunable band-stop characteristics is presented in this work. A thin colloidal dispersion above each element provides this tuning capability. The radial expansion and contraction of this dispersion, as well as the variable permittivity of the dispersion, are used to load each element individually. This design incorporates thin fluidic channels within a PDMS layer below the substrate leading to individual unit cells that provide a closed pressure-driven subsystem that contains the dispersion. With the capability to individually control each cell, groups of cells can be locally altered (individually or in groups) to create gratings and other electromagnetically agile features across the surface or within the volume of a radome or other covering. Simulations and measurements of an S-band tunable design using colloidal Barium Strontium Titanate dispersed Silicone oil are provided to demonstrate the capability to adjust the stop-band characteristics of the FSS across the S-band.Item Novel RF/Microwave Circuits And Systems for Lab on-Chip/on-Board Chemical Sensors(2013-08-02) Abbas Mohamed Helmy, Ahmed MRecent research focuses on expanding the use of RF/Microwave circuits and systems to include multi-disciplinary applications. One example is the detection of the dielectric properties of chemicals and bio-chemicals at microwave frequencies, which is useful for pharmaceutical applications, food and drug safety, medical diagnosis and material characterization. Dielectric spectroscopy is also quite relevant to detect the frequency dispersive characteristics of materials over a wide frequency range for more accurate detection. In this dissertation, on-chip and on-board solutions for microwave chemical sensing are proposed. An example of an on-chip dielectric detection technique for chemical sensing is presented. An on-chip sensing capacitor, whose capacitance changes when exposed to material under test (MUT), is a part of an LC voltage-controlled oscillator (VCO). The VCO is embedded inside a frequency synthesizer to convert the change in the free runing frequency frequency of the VCO into a change of its input voltage. The system is implemented using 90 nm CMOS technology and the permittivities of MUTs are evaluated using a unique detection procedure in the 7-9 GHz frequency range with an accuracy of 3.7% in an area of 2.5 ? 2.5 mm^2 with a power consumption of 16.5 mW. The system is also used for binary mixture detection with a fractional volume accuracy of 1-2%. An on-board miniaturized dielectric spectroscopy system for permittivity detec- tion is also presented. The sensor is based on the detection of the phase difference be- tween the input and output signals of cascaded broadband True-Time-Delay (TTD) cells. The sensing capacitor exposed to MUTs is a part of the TTD cell. The change of the permittivity results in a change of the phase of the microwave signal passing through the TTD cell. The system is fabricated on Rogers Duroid substrates with a total area of 8 ? 7.2 cm2. The permittivities of MUTs are detected in the 1-8 GHz frequency range with a detection accuracy of 2%. Also, the sensor is used to extract the fractional volumes of mixtures with accuracy down to 1%. Additionally, multi-band and multi-standard communication systems motivate the trend to develop broadband front-ends covering all the standards for low cost and reduced chip area. Broadband amplifiers are key building blocks in wideband front-ends. A broadband resistive feedback low-noise amplifier (LNA) is presented using a composite cross-coupled CMOS pair for a higher gain and reduced noise figure. The LNA is implemented using 90 nm CMOS technology consuming 18 mW in an area of 0.06 mm2. The LNA shows a gain of 21 dB in the 2-2300 MHz frequency range, a minimum noise figure of 1.4 dB with an IIP3 of -1.5 dBm. Also, a four-stage distributed amplifier is presented providing bandwidth extension with 1-dB flat gain response up to 16 GHz. The flat extended bandwidth is provided using coupled inductors in the gate line with series peaking inductors in the cascode gain stages. The amplifier is fabricated using 180 nm CMOS technology in an area of 1.19 mm2 achieving a power gain of 10 dB, return losses better than 16 dB, noise figure of 3.6-4.9 dB and IIP3 of 0 dBm with 21 mW power consumption. All the implemented circuits and systems in this dissertation are validated, demonstrated and published in several IEEE Journals and Conferences.