Browsing by Author "Yang, Daegil"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item A Simulator with Numerical Upscaling for the Analysis of Coupled Multiphase Flow and Geomechanics in Heterogeneous and Deformable Porous and Fractured Media(2013-07-15) Yang, DaegilA growing demand for more detailed modeling of subsurface physics as ever more challenging reservoirs - often unconventional, with significant geomechanical particularities - become production targets has moti-vated research in coupled flow and geomechanics. Reservoir rock deforms to given stress conditions, so the simplified approach of using a scalar value of the rock compressibility factor in the fluid mass balance equation to describe the geomechanical system response cannot correctly estimate multi-dimensional rock deformation. A coupled flow and geomechanics model considers flow physics and rock physics simultaneously by cou-pling different types of partial differential equations through primary variables. A number of coupled flow and geomechanics simulators have been developed and applied to describe fluid flow in deformable po-rous media but the majority of these coupled flow and geomechanics simulators have limited capabilities in modeling multiphase flow and geomechanical deformation in a heterogeneous and fractured reservoir. In addition, most simulators do not have the capability to simulate both coarse and fine scale multiphysics. In this study I developed a new, fully implicit multiphysics simulator (TAM-CFGM: Texas A&M Coupled Flow and Geomechanics simulator) that can be applied to simulate a 2D or 3D multiphase flow and rock deformation in a heterogeneous and/or fractured reservoir system. I derived a mixed finite element formu-lation that satisfies local mass conservation and provides a more accurate estimation of the velocity solu-tion in the fluid flow equations. I used a continuous Galerkin formulation to solve the geomechanics equa-tion. These formulations allowed me to use unstructured meshes, a full-tensor permeability, and elastic stiffness. I proposed a numerical upscaling of the permeability and of the elastic stiffness tensors to gener-ate a coarse-scale description of the fine-scale grid in the model, and I implemented the methodology in the simulator. I applied the code I developed to the simulation of the problem of multiphase flow in a fractured tight gas system. As a result, I observed unique phenomena (not reported before) that could not have been deter-mined without coupling. I demonstrated the importance and advantages of using unstructured meshes to effectively and realistically model a reservoir. In particular, high resolution discrete fracture models al-lowed me to obtain more detailed physics that could not be resolved with a structured grid. I performed numerical upscaling of a very heterogeneous geologic model and observed that the coarse-scale numerical solution matched the fine scale reference solution well. As a result, I believed I developed a method that can capture important physics of the fine-scale model with a reasonable computation cost.Item Heavy Oil Upgrading from Electron Beam (E-Beam) Irradiation(2011-02-22) Yang, DaegilSociety's growing demands for energy results in rapid increase in oil consumption and motivates us to make unconventional resources conventional resources. There are enormous amounts of heavy oil reserves in the world but the lack of cost effective technologies either for extraction, transportation, or refinery upgrading hinders the development of heavy oil reserves. One of the critical problems with heavy oil and bitumen is that they require large amounts of thermal energy and expensive catalysts to upgrade. This thesis demonstrates that electron beam (E-Beam) heavy oil upgrading, which uses unique features of E-Beam irradiation, may be used to improve conventional heavy oil upgrading. E-Beam processing lowers the thermal energy requirements and could sharply reduce the investment in catalysts. The design of the facilities can be simpler and will contribute to lowering the costs of transporting and processing heavy oil and bitumen. E-Beam technology uses the high kinetic energy of fast electrons, which not only transfer their energy but also interact with hydrocarbons to break the heavy molecules with lower thermal energy. In this work, we conducted three major stages to evaluate the applicability of E-Beam for heavy oil upgrading. First, we conducted laboratory experiments to investigate the effects of E-Beam on hydrocarbons. To do so, we used a Van de Graff accelerator, which generates the high kinetic energy of electrons, and a laboratory scale apparatus to investigate extensively how radiation effects hydrocarbons. Second, we studied the energy transfer mechanism of E-Beam upgrading to optimize the process. Third, we conducted a preliminary economic analysis based on energy consumption and compared the economics of E-Beam upgrading with conventional upgrading. The results of our study are very encouraging. From the experiments we found that E-Beam effect on hydrocarbon is significant. We used less thermal energy for distillation of n-hexadecane (n-C16) and naphtha with E-Beam. The results of experiments with asphaltene indicate that E-Beam enhances the decomposition of heavy hydrocarbon molecules and improves the quality of upgraded hydrocarbon. From the study of energy transfer mechanism, we estimated heat loss, fluid movement, and radiation energy distribution during the reaction. The results of our economic evaluation show that E-Beam upgrading appears to be economically feasible in petroleum industry applications. These results indicate significant potential for the application of E-Beam technology throughout the petroleum industry, particularly near production facilities, transportation pipelines, and refining industry.