Browsing by Author "Goyal, Deepak"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Analysis of 2x2 braided composites(Texas A&M University, 2004-09-30) Goyal, DeepakTextile composites can be tailored to meet specific thermo-mechanical requirements for structural applications. The focus of this research is on 2x2 biaxial braided composites since they have good stiffness and strength properties. Moreover, they have potentially better impact and fatigue resistance than laminated composites. Along with good properties, they have a reduced manufacturing cost because much of the fabrication can be automated. In order to exploit these benefits, thorough understanding of the effect of various factors on their material behavior is necessary. Obtaining effective mechanical properties is the first order of concern in any structural analysis. This work presents an investigation of the effect of various parameters like braid angle, waviness ratio, stacking sequence and material properties on the effective engineering properties of the 2x2 braids. To achieve this goal, three dimensional finite element micromechanics models were developed first. Extensive parametric studies were conducted for two material systems: 1). Glass (S2) fiber / epoxy (SC-15) matrix and 2). Carbon (AS4) fiber / Vinyl Ester (411-350) matrix. Equivalent laminated materials with angle plies and a resin layer were also analyzed to compare the difference in predictions from the full three dimensional finite element analysis of the 2x2 braided composites. A full three-dimensional stress state exists in braids even for very simple loading. In order to locate the potential damage spots, the stress distributions in both the matrix and the tows were predicted. The effect of braid angle on location and magnitude of peak stresses was determined.Item Analysis of linear elasticity and non-linearity due to plasticity and material damage in woven and biaxial braided composites(2009-05-15) Goyal, DeepakTextile composites have a wide variety of applications in the aerospace, sports, automobile, marine and medical industries. Due to the availability of a variety of textile architectures and numerous parameters associated with each, optimal design through extensive experimental testing is not practical. Predictive tools are needed to perform virtual experiments of various options. The focus of this research is to develop a better understanding of linear elastic response, plasticity and material damage induced nonlinear behavior and mechanics of load flow in textile composites. Textile composites exhibit multiple scales of complexity. The various textile behaviors are analyzed using a two-scale finite element modeling. A framework to allow use of a wide variety of damage initiation and growth models is proposed. Plasticity induced non-linear behavior of 2x2 braided composites is investigated using a modeling approach based on Hill?s yield function for orthotropic materials. The mechanics of load flow in textile composites is demonstrated using special non-standard postprocessing techniques that not only highlight the important details, but also transform the extensive amount of output data into comprehensible modes of behavior. The investigations show that the damage models differ from each other in terms of amount of degradation as well as the properties to be degraded under a particular failure mode. When compared with experimental data, predictions of some models match well for glass/epoxy composite whereas other?s match well for carbon/epoxy composites. However, all the models predicted very similar response when damage factors were made similar, which shows that the magnitude of damage factors are very important. Full 3D as well as equivalent tape laminate predictions lie within the range of the experimental data for a wide variety of braided composites with different material systems, which validated the plasticity analysis. Conclusions about the effect of fiber type on the degree of plasticity induced non-linearity in a ?25? braid depend on the measure of non-linearity. Investigations about the mechanics of load flow in textile composites bring new insights about the textile behavior. For example, the reasons for existence of transverse shear stress under uni-axial loading and occurrence of stress concentrations at certain locations were explained.