Jonas, E. C. (Edward Charles), 1924-2011-08-262017-05-112011-08-262017-05-111960-08http://hdl.handle.net/2152/13336textA high-temperature x-ray diffraction furnace for use with the General Electric Model XRD-3 x-ray diffraction unit has been developed. The furnace, which was designed and constructed by the author, has an angular range of 0-165° 20. A constant temperature or continuously increasing temperature may be programmed through the temperature range of 20°C to 1000°C. Data on the high-temperature modifications of illite obtained with the high-temperature x-ray diffraction furnace indicate a contraction of the (110) spacing at 300°C and expansions at 725°C and 880°C which were not identifiable using the quench method. The existence of interlayer water in the illite structure to temperatures over 800°C is indicated, based upon the continuous decrease of the (002) basal periodicity with increasing temperature. A skeleton illite structure or a high-temperature illite phase with a d-spacing of 9.87A survives the third endothermic reaction observed by differential thermal analysis and forms a phase which is stable at 900°C.electronicengCopyright is held by the author. Presentation of this material on the Libraries' web site by University Libraries, The University of Texas at Austin was made possible under a limited license grant from the author who has retained all copyrights in the works.X-rays--Diffraction--Equipment and supplies--Design and constructionIllite--Effect of high temperatures on