Sepehrnoori, Kamy, 1951-2010-06-032017-05-112010-06-032017-05-112009-12http://hdl.handle.net/2152/7675textFor a stress-sensitive or stress-dependent reservoir, the interactions between its seepage field and in situ stress field are complex and affect hydrocarbon recovery. A coupled geomechanics and fluid-flow model can capture these relations between the fluid and solid, thereby presenting more precise history matchings and predictions for better well planning and reservoir management decisions. A traditional reservoir simulator cannot adequately or fully represent the ongoing coupled fluid-solid interactions during the production because of using the simplified update-formulation for porosity and the static absolute permeability during simulations. Many researchers have studied multiphase fluid-flow models coupled with geomechanics models during the past fifteen years. The purpose of this research is to develop a coupled geomechanics and compositional model and apply it to problems in the oil recovery processes. An equation of state compositional simulator called the General Purpose Adaptive Simulator (GPAS) is developed at The University of Texas at Austin and uses finite difference / finite control volume methods for the solution of its governing partial differential equations (PDEs). GPAS was coupled with a geomechanics model developed in this research, which uses a finite element method for discretization of the associated PDEs. Both the iteratively coupled solution procedure and the fully coupled solution procedure were implemented to couple the geomechanics and reservoir simulation modules in this work. Parallelization, testing, and verification for the coupled model were performed on parallel clusters of high-performance workstations. MPI was used for the data exchange in the iteratively coupled procedure. Different constitutive models were coded into GPAS to describe complicated behaviors of linear or nonlinear deformation in the geomechanics model. In addition, the geomechanics module was coupled with the dual porosity model in GPAS to simulate naturally fractured reservoirs. The developed coupled reservoir and geomechanics simulator was verified using analytical solutions. Various reservoir simulation case studies were carried out using the coupled geomechanics and GPAS modules.electronicengCopyright is held by the author. Presentation of this material on the Libraries' web site by University Libraries, The University of Texas at Austin was made possible under a limited license grant from the author who has retained all copyrights in the works.Coupled geomechanics modelCompositional modelOil recoveryGeneral Purpose Adaptive SimulatorReservoir simulation modules