Storage Systems for Non-volatile Memory Devices
Abstract
This dissertation presents novel approaches to the use of non-volatile memory devices in building storage systems. There are many types of non-volatile memory devices, and they usually have better performance than regular magnetic hard disks in terms of throughput and latency. This dissertation focused on two of them, NAND flash memory and Phase Change Memory (PCM). This work consisted of two parts.
The first part was to design a high-performance hybrid storage system employing Solid State Drives that are build out of NAND flash memory and Hard Disk Drives. In this hybrid system, we proposed two different policies to improve its performance. One is to exploit the fact that the performances of Solid State Drive and Hard Disk Drive are asymmetric and the other is to exploit concurrency on multiple devices. We implemented prototypes in Linux and evaluate both policies in multiple workloads and multiple configurations. The results showed that the proposed approaches improve the performance significantly, and adapt to different configurations of the system under different workloads.
The second part was to implement a file system on a special class of memory devices, Storage Class Memory (SCM), which is both byte addressable and also nonvolatile, e.g. PCM. We claimed that both the existing regular file systems and the memory based file systems are not suitable for SCM, and proposed a new file system, called SCMFS, which is implemented on the virtual address space. In SCMFS, we utilized the existing memory management module in the operating system to do the block management. Our design keeps address space within a file contiguous to reduce the block management software. The simplicity of SCMFS not only makes it easy to implement, but also improves the performance. We implemented a prototype of SCMFS in Linux and evaluated its performance through multiple benchmarks.