Nanoparticles as Reactive Precursors: Synthesis of Alloys, Intermetallic Compounds, and Multi-Metal Oxides Through Low-Temperature Annealing and Conversion Chemistry

dc.contributorSchaak, Raymond E.
dc.contributorClearfield, Abraham
dc.creatorBauer, John C.
dc.date.accessioned2010-07-15T00:13:16Z
dc.date.accessioned2010-07-23T21:44:36Z
dc.date.accessioned2017-04-07T19:57:10Z
dc.date.available2010-07-15T00:13:16Z
dc.date.available2010-07-23T21:44:36Z
dc.date.available2017-04-07T19:57:10Z
dc.date.created2009-05
dc.date.issued2010-07-14
dc.description.abstractAlloys, intermetallic compounds and multi-metal oxides are generally made by traditional solid-state methods that often require melting or grinding/pressing powders followed by high temperature annealing (> 1000 degrees C) for days or weeks. The research presented here takes advantage of the fact that nanoparticles have a large fraction of their atoms on the surface making them highly reactive and their small size virtually eliminates the solid-solid diffusion process as the rate limiting step. Materials that normally require high temperatures and long annealing times become more accessible at relatively low-temperatures because of the increased interfacial contact between the nanoparticle reactants. Metal nanoparticles, formed via reduction of metal salts in an aqueous solution and stabilized by PVP (polyvinylpyrrolidone), were mixed into nanoparticle composites in stoichometric proportions. The composite mixtures were then annealed at relatively low temperatures to form alloy and intermetallic compounds at or below 600 degrees C. This method was further extended to synthesizing multi-metal oxide systems by annealing metal oxide nanoparticle composites hundreds of degrees lower than more traditional methods. Nanoparticles of Pt (supported or unsupported) were added to a metal salt solution of tetraethylene glycol and heated to obtain alloy and intermetallic nanoparticles. The supported intermetallic nanoparticles were tested as catalysts and PtPb/Vulcan XC-72 showed enhanced catalytic activity for formic acid oxidation while Pt3Sn/Vulcan XC-72 and Cu3Pt/y-Al2O3 catalyzed CO oxidiation at lower temperatures than supported Pt. Intermetallic nanoparticles of Pd were synthesized by conversion chemistry methods previously mentioned and were supported on carbon and alumina. These nanoparticles were tested for Suzuki cross-coupling reactions. However; the homocoupled product was generally favored. The catalytic activity of Pd3Pb/y-Al2O3 was tested for the Heck reaction and gave results comparable to Pd/y-Al2O3 with a slightly better selectivity. Conversion chemistry techniques were used to convert Pt nanocubes into Ptbased intermetallic nanocrystals in solution. It was discovered that aggregated clusters of Pt nanoparticles were capable of converting to FePt3; however, when Pt nanocubes were used the intermetallic phase did not form. Alternatively, it was possible to form PtSn nanocubes by a conversion reaction with SnCl2.
dc.identifier.urihttp://hdl.handle.net/1969.1/ETD-TAMU-2009-05-642
dc.language.isoeng
dc.subjectNanoparticles
dc.subjectCatalysts
dc.subjectAlloys
dc.subjectIntermetallic Compounds
dc.subjectMulti-Metal Oxides
dc.subjectFuel Cells
dc.subjectFormic Acid Oxidation
dc.subjectMethanol Oxidation
dc.subjectCO Oxidation
dc.subjectSuzuki Coupling Reaction
dc.subjectHeck Reaction
dc.subjectNanocubes
dc.subjectSupported Nanoparticles
dc.subjectFePt3
dc.subjectPt3Sn
dc.subjectPtPb
dc.subjectNanocubes
dc.titleNanoparticles as Reactive Precursors: Synthesis of Alloys, Intermetallic Compounds, and Multi-Metal Oxides Through Low-Temperature Annealing and Conversion Chemistry
dc.typeBook
dc.typeThesis

Files