Show simple item record

dc.contributor.advisorSepehrnoori, Kamy, 1951-en
dc.contributor.advisorPodio, A. L.en
dc.identifier.oclc207238013en
dc.creatorPourafshary, Peyman, 1979-en
dc.date.accessioned2008-08-29T00:00:32Zen
dc.date.accessioned2017-05-11T22:18:51Z
dc.date.available2008-08-29T00:00:32Zen
dc.date.available2017-05-11T22:18:51Z
dc.date.issued2007-12en
dc.identifier.urihttp://hdl.handle.net/2152/3638en
dc.description.abstractHydrocarbon reserves are generally produced through wells drilled into reservoir pay zones. During production, gas liberation from the oil phase occurs due to pressure decline in the wellbore. Thus, we expect multiphase flow in some sections of the wellbore. As a multi-phase/multi-component gas-oil mixture flows from the reservoir to the surface, pressure, temperature, composition, and liquid holdup distributions are interrelated. Modeling these multiphase flow parameters is important to design production strategies such as artificial lift procedures. A wellbore fluid flow model can also be used for pressure transient test analysis and interpretation. Considering heat exchange in the wellbore is important to compute fluid flow parameters accurately. Modeling multiphase fluid flow in the wellbore becomes more complicated due to heat transfer between the wellbore fluids and the surrounding formations. Due to mass, momentum, and energy exchange between the wellbore and the reservoir, the wellbore model should be coupled with a numerical reservoir model to simulate fluid flow accurately. This model should be non-isothermal to consider the effect of temperature. Our research shows that, in some cases, ignoring compositional effects may lead to errors in pressure profile prediction for the wellbore. Nearly all multiphase wellbore simulations are currently performed using the "black oil" approach. The primary objective of this study was to develop a non-isothermal wellbore simulator to model transient fluid flow and temperature and couple the model to a reservoir simulator called General Purpose Adaptive Simulator (GPAS). The coupled wellbore/reservoir simulator can be applied to steady state problems, such as production from, or injection to a reservoir as well as during transient phenomena such as well tests to accurately model wellbore effects. Fluid flow in the wellbore may be modeled either using the blackoil approach or the compositional approach, as required by the complexity of the fluids. The simulation results of the new model were compared with field data for pressure gradients and temperature distribution obtained from wireline conveyed pressure recorder and acoustic fluid level measurements for a gas/oil producer well during a buildup test. The model results are in good agreement with the field data. Our simulator gave us further insights into the wellbore dynamics that occur during transient problems such as phase segregation and counter-current multiphase flow. We show that neglecting these multiphase flow dynamics would lead to unreliable results in well testing analysis.en
dc.format.mediumelectronicen
dc.language.isoengen
dc.rightsCopyright © is held by the author. Presentation of this material on the Libraries' web site by University Libraries, The University of Texas at Austin was made possible under a limited license grant from the author who has retained all copyrights in the works.en
dc.subject.lcshOil wells--Mathematical modelsen
dc.subject.lcshGas wells--Mathematical modelsen
dc.subject.lcshMultiphase flow--Mathematical modelsen
dc.subject.lcshHydrocarbon reservoirs--Mathematical modelsen
dc.subject.lcshHeat--Transmission--Mathematical modelsen
dc.titleA coupled wellbore/reservoir simulator to model multiphase flow and temperature distributionen
dc.description.departmentPetroleum and Geosystems Engineeringen
dc.type.genreThesisen


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record