Accounting for reservoir uncertainties in the design and optimization of chemical flooding processes

Date

2012-08

Journal Title

Journal ISSN

Volume Title

Publisher

Abstract

Chemical Enhanced Oil Recovery methods have been growing in popularity as a result of the depletion of conventional oil reservoirs and high oil prices. These processes are significantly more complex when compared to waterflooding and require detailed engineering design before field-scale implementation. Coreflood experiments that have been performed on reservoir rock are invaluable for obtaining parameters that can be used for field-scale flooding simulations. However, the design used in these floods may not always scale to the field due to heterogeneities, chemical retention, mixing and dispersion effects. Reservoir simulators can be used to identify an optimum design that accounts for these effects but uncertainties in reservoir properties can still cause poor project results if it not properly accounted for. Different reservoirs will be investigated in this study, including more unconventional applications of chemical flooding such as a 3md high-temperature, carbonate reservoir and a heterogeneous sandstone reservoir with very high initial oil saturation. The goal of the research presented here is to investigate the impact that select reservoir uncertainties can have on the success of the pilot and to propose methods to reduce the sensitivity to these parameters. This research highlights the importance of good mobility control in all the case studies, which is shown to have a significant impact on the economics of the project. It was also demonstrated that a slug design with good mobility control is less sensitive to uncertainties in the relative permeability parameters. The research also demonstrates that for a low-permeability reservoir, surfactant propagation can have a significant impact on the economics of a Surfactant-Polymer Flood. In addition to mobilizing residual oil and increasing oil recovery, the surfactant enhances the relative permeability and this has a significant impact on increasing the injectivity and reducing the project life. Injecting a high concentration of surfactant also makes the design less sensitive to uncertainties in adsorption. Finally, it was demonstrated that for a heterogeneous reservoir with high initial oil saturation, optimizing the salinity gradient will significantly increase the oil recovery and will also make the process less sensitive to uncertainties in the cation exchange capacity.

Description

text

Citation