Characterization of Drip Emitters and Computing Distribution Uniformity in a Drip Irrigation System at Low Pressure Under Uniform Land Slopes
Dutta, Deba P.
MetadataShow full item record
Characteristics of emitters under low pressure are essential for designing drip irrigation systems. Low pressure data for drip emitters are not available from manufacturers. A laboratory test was conducted to evaluate the performance of five types of newly manufactured drip tapes, especially under a low pressure distribution system. The five drip products that were tested were (i) Toro Drip in PC (PCS 1810-18- 100), (ii) T-Tape (TT15-1245-0100), (iii) Mister_LS (MLD-HDT100), (iv) Mister_PS (MLD-1PC 25), and (v) Netafim (Techline CV 560 050). Drip tapes tested in this study have design discharge rates of 4.00 L/hr @ 206.84 Kpa (1.06 gph @ 30 psi), 1.02 L/hr @ 55.16 Kpa (0.27 gph @ 8 psi), 3.785 L/hr @ 172.37 Kpa (1.00 gph @ 25 psi), 3.785 L/hr @172.37 Kpa (1.00 gph @ 25 psi), and 0.984 L/hr @ 206.84 Kpa (0.26 gph @ 20psi), respectively. All of them, except T-Tape, were pressure compensating (PC) emitters; the T-Tape was non-pressure compensating (NPC). For all products, except Toro, the emitter spacing was 0.305 m (12 inches) and for Toro, it was 0.46 m (18 inches). Mister_PS (MLD-1PC 25) was the point source (PS) emitter and all others were line source emitters. Drip products were tested with 15 different operating pressures ranging from 5.97 KPa (0.87 psi) to 344.74 KPa (50.00 psi). From an evaluation of 60 emitters from each product, the Toro brand showed an average uniformity coefficient (UC) of 91.24 %, with a coefficient of variation (Cv) of 0.06, T-Tape drip products showed an average UC of 96.63 % with a Cv of 0.04, Mister_ LS showed an average UC of 93.12 % with a Cv of 0.08, Mister_PS showed an average UC of 96.33 % with a Cv of 0.04, and Netafim showed an average UC of 97.92 % with a Cv of 0.02. Flow rate vs. pressure head (Q-H) curves were also developed for each drip emitter tested. From emitter exponent values it was observed that all of the pressure compensating (PC) products behaved like NPC emitters at low pressures, although they behaved like PC emitters under normal operating pressures. From statistical analysis, it was determined that except for Netafim product, all other tested products were effective under low operating pressures as were under high operating or recommended pressures. Netafim product had no emission under low pressures. Using the measured average emission rate and developed Q-H curves, the distribution uniformities of all products except Netafim were calculated under low pressure ranges of 5.97 KPa (0.87 psi) to 23.88 KPa (3.50 psi ) for different lengths of laterals and under 0%, 1%, 2%