A model for matrix acidizing of long horizontal well in carbonate reservoirs
MetadataShow full item record
Horizontal wells are drilled to achieve improved reservoir coverage, high production rates, and to overcome water coning problems, etc. Many of these wells often produce at rates much below the expected production rates. Low productivity of horizontal wells is attributed to various factors such as drilling induced formation damage, high completion skins, and variable formation properties along the length of the wellbore as in the case of heterogeneous carbonate reservoirs. Matrix acidizing is used to overcome the formation damage by injecting the acid into the carbonate rock to improve well performance. Designing the matrix acidizing treatments for horizontal wells is a challenging task because of the complex process. The estimation of acid distribution along wellbore is required to analyze that the zones needing stimulation are receiving enough acid. It is even more important in cases where the reservoir properties are varying along the length of the wellbore. A model is developed in this study to simulate the placement of injected acid in a long horizontal well and to predict the subsequent effect of the acid in creating wormholes, overcoming damage effects, and stimulating productivity. The model tracks the interface between the acid and the completion fluid in the wellbore, models transient flow in the reservoir during acid injection, considers frictional effects in the tubulars, and predicts the depth of penetration of acid as a function of the acid volume and injection rate at all locations along the completion. A computer program is developed implementing the developed model. The program is used to simulate hypothetical examples of acid placement in a long horizontal section. A real field example of using the model to history match actual treatment data from a North Sea chalk well is demonstrated. The model will help to optimize acid stimulation in horizontal wells.