Show simple item record

dc.contributorEhsani, Mehrdad
dc.creatorAsadi, Peyman
dc.date.accessioned2010-01-14T23:57:10Z
dc.date.accessioned2010-01-15T23:58:12Z
dc.date.accessioned2017-04-07T19:54:11Z
dc.date.available2010-01-14T23:57:10Z
dc.date.available2010-01-15T23:58:12Z
dc.date.available2017-04-07T19:54:11Z
dc.date.created2006-12
dc.date.issued2009-05-15
dc.identifier.urihttp://hdl.handle.net/1969.1/ETD-TAMU-1102
dc.description.abstractThis dissertation contains the results of research conducted on the design and control characterization of a Switched Reluctance Generator (SRG) for maximum output power. The SRG is an attractive solution to the increasing worldwide demand of electrical energy. It is low cost with a rugged structure, operates with high efficiency over a wide speed range, and is fault tolerant. In many applications, size and weight are the main criteria in selecting the generator. Hence, in design and control of the generator, system designers always strive for increasing power density, or in other words, maximizing the output power for a given size. Despite the extensive research on the motoring operation of the Switched Reluctance Machine, only a few publications have investigated the generating mode of operation of this machine. Results and algorithms from this research can be referenced for better utilizing the SRG in many applications. As the first stage to output power maximization, design parameters and control variables affecting the average output power of the SRG are identified through a systematic approach. The optimal values for maximizing the output power are found through an analytical approach and iterative simulations. The results are then verified experimentally. After finding the optimal values for control variables, a controller is designed. This controller is model dependent. If the model used for design is not accurate or the machine parameters are deviated from the designed values, the machine will not generate the maximum output power. Therefore, a self-tuning algorithm, based on a local search method, is proposed and experimentally tested. It works effectively and does not need extra hardware or rigorous calculations. The attempts to benefit from the SRG may look tantalizing, but it poses a challenge as well. Output power maximization can lead to an oversized SRG converter and its output filter, which will reduce the overall power density of the motor drive. The last piece of this dissertation analyzes the effect of a commutation algorithm on the output filter, reducing its size with active control of phase currents, and proposing a novel control algorithm that was investigated through experiments over all of the speed range.
dc.language.isoen_US
dc.subjectElectric Generators
dc.subjectSwitched Reluctance Machine
dc.subjectSRG
dc.subjectPower Electronics
dc.subjectElectromechanical Devices
dc.subjectElectric Machines
dc.titleDevelopment and application of an advanced switched reluctance generator drive
dc.typeBook
dc.typeThesis


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record