Design techniques for high intermediate frequency bandpass (sigma/delta) modulator.

The focus of the present thesis is the circuit-level implementation of an excess loop delay compensation scheme which optimizes excess loop delay in Analog-to-Digital Converter(ADC) by using a programmable delay block and synchronizes the signal passing through Dynamic Element Matching block, used to mitigate mismatch effects of multi-bit Digital-to-Analog Converter(DAC). The proposed delay block has tuning range of T/10 to T/2 seconds, with a step size of T/30 seconds, where T is the time period (1.25 nanoseconds) of sampling signal (800 MHz) in high IF (200 MHz) Bandpass [sigma delta] ADC. The implementation details of the element rotation scheme used to calibrate the multi-bit DAC static error mismatch are also presented. Also presented is the design of high frequency highly linear Operational Transconductance Amplifier(OTA) targeted for continuous-time filters in a high resolution High Intermediate Frequency (200 MHz) Bandpass [sigma delta] ADC for Software Radio applications. Proposed OTA uses super source follower input stage to enhance its voltage-to-current conversion linearity. The design has been simulated using TSMC 0.18 ?m CMOS process. The OTA has small signal transconductance of 0.9 mA/V, IM3 below -79 dB (for 0.3 Vpp input), Signal-to-Noise Ratio of 82 dB and power consumption of 6.8 mW, when tested in unity gain configuration.