Shape memory alloy for vibration isolation and damping

Date

2008-10-10

Journal Title

Journal ISSN

Volume Title

Publisher

Texas A&M University

Abstract

This work investigates the use of shape memory alloys (SMAs) for vibration isolation and damping of mechanical systems. The first part of this work evaluates the nonlinear dynamics of a passive vibration isolation and damping (PVID) device through numerical simulations and experimental correlations. The device, a mass connected to a frame through two SMA wires, is subjected to a series of continuous acceleration functions in the form of a sine sweep. Frequency responses and transmissibility of the device as well as temperature variations of the SMA wires are analyzed for the case where the SMA wires are pre-strained at 4.0% of their original length. Numerical simulations of a one-degree of freedom (1-DOF) SMA oscillator are also conducted to corroborate the experimental results. The configuration of the SMA oscillator is based on the PVID device. A modified version of the constitutive model proposed by Boyd and Lagoudas, which considers the thermomechanical coupling, is used to predict the behavior of the SMA elements of the oscillator. The second part of this work numerically investigates chaotic responses of a 1- DOF SMA oscillator composed of a mass and a SMA element. The restitution force of the oscillator is provided by an SMA element described by a rate-independent, hysteretic, thermomechanical constitutive model. This model, which is a new version of the model presented in the first part of this work, allows smooth transitions between the austenitic and the martensitic phases. Chaotic responses of the SMA oscillator are evaluated through the estimation of the Lyapunov exponents. The Lyapunov exponent estimation of the SMA system is done by adapting the algorithm by Wolf and co-workers. The main issue of using this algorithm for nonlinear, rateindependent, hysteretic systems is related to the procedure of linearization of the equations of motion. The present work establishes a procedure of linearization that allows the use of the classical algorithm. Two different modeling cases are considered for isothermal and non-isothermal heat transfer conditions. The evaluation of the Lyapunov exponents shows that the proposed procedure is capable of quantifying chaos in rate-independent, hysteretic dynamical systems.

Description

Citation