Identification and compensation of friction for a dual stage positioning system

Date

2005-11-01

Journal Title

Journal ISSN

Volume Title

Publisher

Texas A&M University

Abstract

Motion control systems are usually designed to track trajectories and/or regulate about a desired point. Most of the other objectives, like minimizing the tracking time or minimizing the energy expended, are secondary which quantify the above described objectives. The control problem in hard disk drives is tracking and seeking the desired tracks. Recent increase in the storage capacity demands higher accuracy of the read/write head. Dual stage actuators as compared to conventional single actuator increases the accuracy of the read/write head in hard disk drives. A scaled up version of the dual stage actuator is considered as the test bed for this thesis. Friction is present in all electromechanical systems. This thesis deals with modelling of the dual stage actuator test bed. A linear model predicts the behavior of the fine stage. Friction is significant in the coarse stage. Considerable time has been spent to model the coarse stage as a friction based model. Initially, static friction models were considered to model the friction. Dynamic models, which describe friction better when crossing zero velocity were considered. By analyzing several experimental data it was concluded that the friction was dependent on position and velocity as compared to conventional friction models which are dependent on the direction of motion. Static and Coulomb friction were modelled as functions of velocity and position. This model was able to predict the behavior of the coarse stage satisfactorily for various initial conditions. A friction compensation scheme based on the modelled friction is used to linearize the system based on feedback linearization techniques.

Description

Citation