Development of a cell-based stream flow routing model

This study presents the development of a cell-based routing model. The model developed is a two parameter hydrological routing model that uses a coarse resolution stream network to route runoff from each cell in the watershed to the outlet. The watershed is divided into a number of equal cells, which are approximated as cascade of linear reservoirs or tanks. Water is routed from a cell downstream, depending on the flow direction of the cell, using the cascade of tanks. The routing model consists of two phases, first is the overland flow routing, which is followed by the channel flow routing. In this study, the cell-to-cell stream flow routing model is applied to the Brazos River Basin to demonstrate the impact of the cascade of tanks on the flow over a simple linear reservoir method. This watershed was tested with a uniform runoff depth in absence of observed runoff data. A case study on Waller Creek in Austin, Texas with observed runoff depths and stream flow is used to demonstrate the calibration and validation of model parameters.