Fixed Bed Counter Current Gasification of Mesquite and Juniper Biomass Using Air-steam as Oxidizer

Thermal gasification of biomass is being considered as one of the most promising technologies for converting biomass into gaseous fuel. Here we present results of gasification, using an adiabatic bed gasifier with air, steam as gasification medium, of mesquite and juniper. From Thermo-gravimetric analyses the pre-exponential factor (B) and activation energy of fuels for pyrolysis were obtained using single reaction models (SRM) and parallel reaction model (PRM). The single reaction model including convention Arrhenius (SRM-CA) and maximum volatile release rate model (SRM-MVR). The parallel reaction model fits the experimental data very well, followed by MVR. The CA model the least accurate model. The activation energies obtained from PRM are around 161,000 kJ/kmol and 158,000 kJ/kmol for juniper and mesquite fuels, respectively. And, the activation energies obtained from MVR are around100,000 kJ/kmol and 85,000 kJ/kmol for juniper and mesquite fuels, respectively.

The effects of equivalence ratio (ER), particle size, and moisture content on the temperature profile, gas composition, tar yield, and higher heating value (HHV) were investigated. For air gasification, when moisture increased from 6% to 12% and ER decreased from 4.2 to 2.7, the mole composition of the dry product gas for mesquite varied as follow: 18-30% CO, 2-5% H2, 1-1.5% CH4, 0.4-0.6% C2H6, 52-64% N2, and 10-12% CO2.

The tar yield shows peak value (150 g/Nm^3) with change in moisture content between 6-24%. The tar collected from the gasification process included light tar and heavy tar. The main composition of the light tar was moisture. The chemical properties of heavy tar were determined.

For air-steam gasification, H2 rich mixture gas was produced. The HHV of the mesquite gas increased first when S: F ratio increased from 0.15 to 0.3 and when the S: F ratio increased to 0.45, HHV of the gas decreased. Mesquite was blended with the Wyoming Powder River Basin (PRB) coal with ratio of 90:10 and 80:20 in order to increase the Tpeak and HHV. It was found that the Tpeak increased with the increase of PRB coal weight percentage (0% to 20%).