Show simple item record

dc.creatorSumesaglam, Taner
dc.date.accessioned2004-11-15T19:45:14Z
dc.date.accessioned2017-04-07T19:48:47Z
dc.date.available2004-11-15T19:45:14Z
dc.date.available2017-04-07T19:48:47Z
dc.date.created2004-08
dc.date.issued2004-11-15
dc.identifier.urihttp://hdl.handle.net/1969.1/1055
dc.description.abstractIntegrated high-Q continuous-time filters require adaptive tuning circuits that will correct the filter parameters such as center frequency and quality factor (Q). Three different automatic tuning techniques are introduced. In all of the proposed methods, frequencyand quality factor tuning loops are controlled digitally, providing stable tuning by activating only one loop at a given time. In addition, a direct relationship between passband gain and quality factor is not required, so the techniques can be applied to active LC filters as well as Gm-C filters. The digital-tuning method based on phase comparison was veri?ed with 1% tuning accuracy at 5.5 MHz for Q of 20. It uses phase information for both Q and center-frequency tuning. The ?lter output phase is tuned to the known references, which are generated by a frequency synthesizer. The core tuning circuit consists of D ?ip-?ops (DFF) and simple logic gates. DFFs are utilized to perform binary phase comparisons. The second method, high-order digital tuning based on phase comparison, is an extension of the previous technique to high-order analog filters without depending on the master-slave approach. Direct tuning of the overall filter response is achieved without separating individual biquad sections, eliminating switches and their parasitics. The tuning system was veri?ed with a prototype 6th order bandpass ?lter at 19 MHz with 0.6 MHz bandwidth, which was fabricated in a conventional 0.5 [mu]m CMOS technology. Analysis of different practical limitations is also provided. Finally, the digital-tuning method based on magnitude comparison is proposed for second-order filters for higher frequency operations. It incorporates a frequency synthesizer to generate reference signals, an envelope detector and a switched comparator to compare output magnitudes at three reference frequencies. The theoretical analysis of the technique and the simulation results are provided.
dc.language.isoen_US
dc.publisherTexas A&M University
dc.subjectautomatic tuning
dc.subjectfilter
dc.subjectCMOS analog integrated circuits
dc.subjectlow voltage
dc.subjecttransconductance
dc.subjectOTA-C filter
dc.titleAutomatic tuning of continuous-time filters
dc.typeThesis


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record