Browsing by Subject "Dynamic traffic assignment"
Now showing 1 - 9 of 9
Results Per Page
Sort Options
Item Application of a subnetwork characterization methodology for dynamic traffic assignment(2014-12) Bringardner, Jack William, 1989-; Machemehl, Randy B.The focus of this dissertation is a methodology to select an appropriate subnetwork from a large urban transportation network that experiences changes to a small fraction of the whole network. Subnetwork selection techniques are most effective when using a regional dynamic traffic assignment model. The level of detail included in the regional model relieves the user of manually coding subnetwork components because they can be extracted from the full model. This method will reduce the resources necessary for an agency to complete an analysis through time and cost savings. Dynamic traffic assignment also has the powerful capability of determining rerouting due to network changes. However, the major limitation of these new dynamic models is the computational demand of the algorithms, which inhibit use of full regional models for comparing multiple scenarios. By examining a smaller window of the network, where impacts are expected to occur, the burden of computer power and time can be overcome. These methods will contribute to the accuracy of dynamic transportation systems analysis, increase the tractability of these advanced traffic models, and help implement new modeling techniques previously limited by network size. The following describes how to best understand the effects of reducing a network to a subarea and how this technique may be implemented in practice.Item Data-driven placement of centroid connectors in dynamic traffic assignment(2016-08) James, Rachel Michelle; Boyles, Stephen David, 1982-; Gemar, Mason DRecent technological advances allows transportation engineering professions to collect, share, and handle unprecedented quantities of data, which has the potential to transform current transportation planning paradigms. In the immediate future, data can be used to improve the precision and capabilities of existing transportation network modeling frameworks. Parcel data is a large, readily available data source that represents the location of public lands, businesses, and residences and is frequently used by government and businesses for land use and zoning decisions. This thesis looks at the viability of using parcel data to inform static traffic assignment (STA) and dynamic traffic assignment (DTA) connector placement in a medium sized network in the Austin, TX region. Simulation-based DTA models are particularly sensitive to the topological detail of the traffic network, including the location of centroid connectors. Traditional centroid connector placement strategies may lead to excessive congestion and unrealistic traffic patterns, while manual network refinement is prohibitive in large regional models. In this thesis, parcel-level data is used to both allocate travel demand between two sub-regions in each considered traffic analysis zone and to select appropriate nodes for the centroid connector placement. Numerical experiments suggest that the proposed approach better approximates both corridor travel times and traffic counts throughout the network, with improvements of more than 40 percent in travel time estimation accuracy, and 12 percent in traffic count estimation. Additionally, the scenarios that best matched count and travel time data were the scenarios that had the highest average parcel density per entry/exit node, indicating that parcel data is an acceptable proxy for high demand points in the network. When applied in STA, the results were not quite as promising. Although this methodology was able to improve the utilization of lower capacity links, the results ultimately did not better resemble volume count data. However, this does represent a simple, transparent, and data-driven approach for centroid connector placement in static traffic assignment that performs as well as traditional methods.Item Dynamic traffic assignment-based modeling paradigms for sustainable transportation planning and urban development(2014-05) Shah, Rohan Jayesh; Boyles, Stephen David, 1982-Transportation planning and urban development in the United States have synchronously emerged over the past few decades to encompass goals associated with sustainability, improved connectivity, complete streets and mitigation of environmental impacts. These goals have evolved in tandem with some of the relatively more traditional objectives of supply-side improvements such as infrastructure and capacity expansion. Apart from the numerous federal regulations in the US transportation sector that reassert sustainability motivations, metropolitan planning organizations and civic societies face similar concerns in their decision-making and policy implementation. However, overall transportation planning to incorporate these wide-ranging objectives requires characterization of large-scale transportation systems and traffic flow through them, which is dynamic in nature, computationally intense and a non-trivial problem. Thus, these contemporary questions lie at the interface of transportation planning, urban development and sustainability planning. They have the potential of being effectively addressed through state-of-the-art transportation modeling tools, which is the main motivation and philosophy of this thesis. From the research standpoint, some of these issues have been addressed in the past typically from the urban design, built-environment, public health and vehicle technology and mostly qualitative perspectives, but not as much from the traffic engineering and transportation systems perspective---a gap in literature which the thesis aims to fill. Specifically, it makes use of simulation-based dynamic traffic assignment (DTA) to develop modeling paradigms and integrated frameworks to seamlessly incorporate these in the transportation planning process. In addition to just incorporating them in the planning process, DTA-based paradigms are able to accommodate numerous spatial and temporal dynamics associated with system traffic, which more traditional static models are not able to. Besides, these features are critical in the context of the planning questions of this study. Specifically, systemic impacts of suburban and urban street pattern developments typically found in US cities in past decades of the 20th century have been investigated. While street connectivity and design evolution is mostly regulated through local codes and subdivision ordinances, its impacts on traffic and system congestion requires modeling and quantitative evidence which are explored in this thesis. On the environmental impact mitigation side, regional emission inventories from the traffic sector have also been quantified. Novel modeling approaches for the street connectivity-accessibility problem are proposed. An integrated framework using the Environmental Protection Agency's regulatory MOVES model has been developed, combining it with mesoscopic-level DTA simulation. Model demonstrations and applications on real and large-sized study areas reveal that different levels of connectivity and accessibility have substantial impacts on system-wide traffic---as connectivity levels reduce, traffic and congestion metrics show a gradually increasing trend. As regards emissions, incorporation of dynamic features leads to more realistic emissions inventory generation compared to default databases and modules, owing to consideration of the added dynamic features of system traffic and region-specific conditions. Inter-dependencies among these sustainability planning questions through the common linkage of traffic dynamics are also highlighted. In summary, the modeling frameworks, analyses and findings in the thesis contribute to some ongoing debates in planning studies and practice regarding ideal urban designs, provisions of sustainability and complete streets. Furthermore, the integrated emissions modeling framework, in addition to sustainability-related contributions, provides important tools to aid MPOs and state agencies in preparation of state implementation plans for demonstrating conformity to national ambient air-quality standards in their regions and counties. This is a critical condition for them to receive federal transportation funding.Item Enhancing the practical usability of dynamic traffic assignment(2012-12) Pool, Christopher Matthew; Boyles, Stephen David, 1982-; Bhat, ChandraA general framework is presented for replacing static traffic assignment with dynamic traffic assignment within the standard four step transportation planning model. Issues including model consistency and the implementation of a proper feedback loop are explored. The new model is compared with the standard four step model in order to highlight the benefits of using dynamic traffic assignment rather than static. The model is then extended to include a term for the difference between experienced and free-flow travel times, which can be used as a proxy for travel time reliability and highlights the benefits of time-dependent DTA. Additionally, a study on improving the quality of convergence for dynamic traffic assignment is conducted in order to help facilitate the usefulness of this modeling approach in practice. A variety of equilibration techniques are tested, and analysis is performed to contrast these techniques with the method of successive averages.Item Improvements and extensions of dynamic traffic assignment in transportation planning(2013-05) Melson, Christopher Lucas; Boyles, Stephen David, 1982-A comprehensive approach is conducted to better utilize dynamic traffic assignment (DTA) in transportation planning by investigating its role in: (1) high-order functions, (2) project evaluation, and (3) traffic assignment. A method is proposed to integrate DTA and the four-step planning model such that traffic assignment is conducted at the subnetwork level while the feedback process occurs at the regional level. By allowing interaction between the subnetwork and regional area, the method is shown to be more beneficial than previous integration structures. Additionally, DTA is applied to a case study involving the proposed urban rail system in Austin, TX. The case study showcases the benefits and capabilities of DTA when analyzing traffic impacts caused by transit rail facilities. Multiple equilibria are shown to arise in simulation-based DTA models due to simplified fundamental diagrams. Piecewise linear diagrams are introduced to eliminate unlikely equilibria. Game theory is also applied to DTA; it is shown that an equilibrium solution is guaranteed to exist for general networks in mixed strategies, and unrealistic equilibria are reduced using the trembling hand refinement.Item Improving the efficiency of dynamic traffic assignment through computational methods based on combinatorial algorithm(2011-08) Nezamuddin; Waller, S. TravisTransportation planning and operation requires determining the state of the transportation system under different network supply and demand conditions. The most fundamental determinant of the state of a transportation system is time-varying traffic flow pattern on its roadway segments. It forms a basis for numerous engineering analyses which are used in operational- and planning-level decision-making process. Dynamic traffic assignment (DTA) models are the leading modeling tools employed to determine time-varying traffic flow pattern under changing network conditions. DTA models have matured over the past three decades, and are now being adopted by transportation planning agencies and traffic management centers. However, DTA models for large-scale regional networks require excessive computational resources. The problem becomes further compounded for other applications such as congestion pricing, capacity calibration, and network design for which DTA needs to be solved repeatedly as a sub-problem. This dissertation aims to improve the efficiency of the DTA models, and increase their viability for various planning and operational applications. To this end, a suite of computational methods based on the combinatorial approach for dynamic traffic assignment was developed in this dissertation. At first, a new polynomial run time combinatorial algorithm for DTA was developed. The combinatorial DTA (CDTA) model complements and aids simulation-based DTA models rather than replace them. This is because various policy measures and active traffic control strategies are best modeled using the simulation-based DTA models. Solution obtained from the CDTA model was provided as an initial feasible solution to a simulation-based DTA model to improve its efficiency – this process is called “warm starting” the simulation-based DTA model. To further improve the efficiency of the simulation-based DTA model, the warm start process is made more efficient through parallel computing. Parallel computing was applied to the CDTA model and the traffic simulator used for warm starting. Finally, another warm start method based on the static traffic assignment model was tested on the simulation-based DTA model. The computational methods developed in this dissertation were tested on the Anaheim, CA and Winnipeg, Canada networks. Models warm-started using the CDTA solution performed better than the purely simulation-based DTA models in terms of equilibrium convergence metrics and run time. Warm start methods using solutions from the static traffic assignment models showed similar improvements. Parallel computing was applied to the CDTA model, and it resulted in faster execution time by employing multiple computer processors. Parallel version of the traffic simulator can also be embedded into the simulation-assignment framework of the simulation-based DTA models and improve their efficiency.Item On the modeling disrupted networks using dynamic traffic assignment(2013-08) Liu, Ruoyu, active 2013; Boyles, Stephen David, 1982-A traffic network can be disrupted by work zones and incidents. Calculating diversion rate is a core issue for estimating demand changes, which is needed to select a suitable work zone configuration and work schedule. An urban network can provide multiple alternative routes, so traffic assignment is the best tool to analyze diversion rates on network level and the local level. Compared with the results from static traffic assignment, dynamic traffic assignment predicts a higher network diversion rate in the morning peak period and off-peak period, a lower local diversion rate in the morning peak period. Additionally, travelers may benefit from knowing real-time traffic condition to avoid the traffic incident areas. Deploying variable message signs (VMSs) is one possible solution. One key issue is optimizing locations of VMSs. A planning model is created to solve the problem. The objective is minimize total system travel time. The link transmission model is used to evaluate the performance of the network, and bounded rational behavior is used to represent drivers' response to VMSs. A self-adapting genetic algorithm (GA) is formulated to solve the problem. This model selects the best locations to provide VMSs, typically places are that allow travelers to switch to alternative routes. Results show that adding more VMSs beyond a certain threshold level does not further reduce travel time.Item Subnetwork analysis for dynamic traffic assignment : methodology and application(2013-12) Gemar, Mason D.; Machemehl, Randy B.Dynamic traffic assignment (DTA) can be used to model impacts of network modification scenarios, including traffic control plans (TCPs), on traffic flow. However, using DTA for modeling construction project impacts is limited by the computational time required to simulate entire roadway networks. DTA modeling of a portion of the larger network surrounding these work zones can decrease the overall run time. However, impacts are likely to extend beyond typical boundaries, and determining the proper extents to be analyzed is necessary. Therefore, a methodology for selecting an adequate portion to analyze using DTA, along with provision for properly analyzing the resultant subnetwork, is necessary to determine the magnitude of construction impacts. The primary objectives of this research center on evaluating subnetwork sizes to determine the appropriate extents required to analyze network modifications and developing a strategy to account for impacts extending beyond the subnetwork boundary. The first objective is accomplished through an in-depth review of subnetwork sizes relative to multiple impact scenarios. Three statistical measures are implemented to evaluate the adequacy of a chosen subnetwork relative to the derived impact scenarios based on an assessment of boundary demand. Ultimately, the root mean squared error is used successfully to provide a series of recommended subnetwork sizes associated with an array of possible impact scenarios. These recommendations are validated, and application of the proposed methodology demonstrated, using five scenarios selected from real-world network modifications observed in the field. When a subnetwork is not large enough and impacts to inbound trips pass beyond the boundary, there is a change in flow at this location that can be represented by a change in the demand assigned to the subnetwork at each entry point. As such, two strategies for adjusting the demand at subnetwork boundaries are implemented and evaluated. This includes use of results from static traffic assignment (STA) models to identify where flow changes occur, and implementation of a logit formulation to estimate demand adjustments based on differences in internal travel times between base and impact scenario models. Based on preliminary results, the logit method was selected for large-scale implementation and testing. In the end, an inconsistent performance of the logit method for full implementation highlights the limitations of the methodology as applied for this study. However, the results suggest that a refined strategy that builds on the foundation established could work more effectively and produce valuable subnetwork demand estimates in the future. This research is used to provide recommendations for selecting and analyzing subnetworks using DTA for an array of common impact scenarios involving network modifications. The tradeoffs between improved efficiency and reduced accuracy associated with using subnetworks are thoroughly demonstrated. It is shown that a considerable amount of computational time and space, as well as effort on the part of an analyst, can be saved. A number of limitations associated with subnetworks are also identified and discussed. The proposed methodology is implemented and evaluated using several software programs and as a result, a number of useful tools and software scripts are developed as part of the research. Ultimately, the valuable experience gained from performing an extensive review of subnetwork analysis using DTA can be used as a basis from which to develop future research initiatives.Item The transition to low speed vehicles for intra-city travel(2012-12) Larsen, Katherine Anne; Walton, C Michael; Machemehl, Randy B; Boyles, Stephen D; Caldas, Carlos H; Longoria, Raul G; Morton, David PA transition to low speed vehicles (LSVs), a federally-designated class of vehicles smaller, lighter and slower (limited to maximum speeds between 20 and 25 mph) than conventional automobiles, for intra-city travel offers several advantages. Their smaller size provides roadway space for other modes such as cycling and reduces the amount of land dedicated to vehicles. Their lower maximum speeds are more compatible with operation in populated areas where cars traveling at 30 mph prove deadly for pedestrians and people biking, and their energy usage and emissions are less than conventional automobiles. Communities such as Lincoln, CA, Peachtree City, GA, and those in the South Bay Cities and Western Riverside Councils of Governments in California recognize the benefits of using LSVs and actively provide infrastructure and programs to support their use. Considering the advantages of LSVs, this dissertation demonstrates potential ways to transition to LSVs and seeks to answer a question considered key to their adoption as the means of motorized travel in the city: Could LSVs also offer a travel time advantage? The basis for this seemingly paradoxical question is the observation that because of their smaller size, lower weight, and slower speed, more space- and operationally-efficient intersections, such as LSV-scaled roundabouts, overpasses and interchanges, are possible within the existing right-of-way to replace signalized intersections. The hypothesis that LSVs can offer comparable or better travel time compared to conventional automobiles assumes the removal of intersection delay will allow LSVs to make-up for their slower speeds. The methodology to test the hypothesis uses dynamic traffic assignment to compare average system, corridor and origin to destination travel times for conventional automobiles and LSVs in a subnetwork of Austin, Texas during transition periods when both vehicles are permitted and when only LSVs may be used for intra-city motorized travel. The findings indicate LSVs can offer similar and in some cases better average travel times than those for conventional automobiles, especially for the LSV-only network. However, careful planning is required during the transition stages when both vehicle types are in operation to maintain acceptable travel times for both conventional automobiles and LSVs.